Jessica Posted December 5, 2012 Report Share Posted December 5, 2012 Why don't we just define, distortion and clipping right now. We all know that clipping can occur no matter the volume. Clipping is simply when a sine wave is outside of the dynamic range of the recording media right? You can also have a clipped sine wave, then reduce that saved information (i.e. aac, mp3 wav....) back below the media's dynamic range and it will still be clipped because that information is already lost. But would someone care to explain how "distortion" is different? Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Neckbeard Posted December 5, 2012 Report Share Posted December 5, 2012 If steve uses it in his tahoe, i will guarantee its a bad ass product Build log, Super slow!!: http://www.stevemeadedesigns.com/board/topic/168096-slow-neckbeards-1970-opel-gt/ Link to comment Share on other sites More sharing options...
Miguels Posted December 5, 2012 Report Share Posted December 5, 2012 Dd-1 is far from liked by everyone only the don't know's don't like it. Nobody who know's anything has anything bad to say about it. I seen a couple smart ass comments come out of you about it. I am sure you are one of those assholes on those other forums running your trap. I wouldn't doubt it for a second. Why don't you tell us how you really feel I've never said anything negative about it Would be hard to do, but could look it up if you really wanted. Same username bro, not trying to start shit but i have seen you talk down on smd and partners.. just the other day you was ranting about DC how the it was expensive for a xl 2 my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
tacomaguy1 Posted December 5, 2012 Report Share Posted December 5, 2012 Dd-1 is far from liked by everyone only the don't know's don't like it. Nobody who know's anything has anything bad to say about it. I seen a couple smart ass comments come out of you about it. I am sure you are one of those assholes on those other forums running your trap. I wouldn't doubt it for a second. Why don't you tell us how you really feel I've never said anything negative about it Would be hard to do, but could look it up if you really wanted. Same username bro, not trying to start shit but i have seen you talk down on smd and partners.. just the other day you was ranting about DC how the it was expensive for a xl DC is not the dd-1 Team Flex Issues Link to comment Share on other sites More sharing options...
kr15 Posted December 5, 2012 Report Share Posted December 5, 2012 only the don't know's don't like it. Nobody who know's anything has anything bad to say about it. I seen a couple smart ass comments come out of you about it. I am sure you are one of those assholes on those other forums running your trap. I wouldn't doubt it for a second. thats funny...considering our team HAS and HAS USED this item. You didnt see him stating that it damaged HIS system. Dont be so quick to judge people. In all honesty, with the Tech claims that the maker of the DD1 makes, there is probabley no one in this thread capable of commenting on it...because we were all clamping our amps up until a few monthes back when they completely refuted this method...What im saying is that the same people clamping their amps are the same ones claiming some elite knowledge of a product 1 Team Flex Issues Low tuning > God 2011 CALI AS1 STATE CHAMP Link to comment Share on other sites More sharing options...
meade916 Posted December 5, 2012 Report Share Posted December 5, 2012 I recently read that a well respected amp person said the DD-1 was in fact causing issues with amps. Don't know the validity of those posts since the person I saw post it want the amp person, but someone that had a conversation with him. if that guy really did say that, then he really isn't that respectable....because a DD-1 won't break an amp any quicker then a DMM or an O-scope would. That is the most ludicris thing i have heard. Go pick the most cheapest, flea market amp you can find. A Boss amp perhaps. And shove a DD-1 probe into it. I bet it doesn't blow. So if it doesn't blow, made of the cheapest parts there is, then what does that say about whatever amp that was that blew? I highly doubt it did FROM our product. I have never seen it EVER and sold 3,000 of them so far...not one customer called and said their amp blew. in fact i have 100% ratings on every single transaction and after sell. Go look at the comments. Nothing but love. This product is sold and being used in training courses all over the world. The people who don't like it are just MAD...and they can stay that way I am extremely happy. 4 All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
meade916 Posted December 5, 2012 Report Share Posted December 5, 2012 bottom line, if you dont like the product, don't buy it. It has proven itself over and over and over again and will continue too. 2 All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
Jessica Posted December 5, 2012 Report Share Posted December 5, 2012 I recently read that a well respected amp person said the DD-1 was in fact causing issues with amps. Don't know the validity of those posts since the person I saw post it want the amp person, but someone that had a conversation with him. if that guy really did say that, then he really isn't that respectable....because a DD-1 won't break an amp any quicker then a DMM or an O-scope would. That is the most ludicris thing i have heard. Go pick the most cheapest, flea market amp you can find. A Boss amp perhaps. And shove a DD-1 probe into it. I bet it doesn't blow. So if it doesn't blow, made of the cheapest parts there is, then what does that say about whatever amp that was that blew? I highly doubt it did FROM our product. I have never seen it EVER and sold 3,000 of them so far...not one customer called and said their amp blew. in fact i have 100% ratings on every single transaction and after sell. Go look at the comments. Nothing but love. This product is sold and being used in training courses all over the world. The people who don't like it are just MAD...and they can stay that way I am extremely happy. And the most awesome thing is you are dumping all that money back into development for more and better products. My sincere thanks Steve! 2 Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
kr15 Posted December 5, 2012 Report Share Posted December 5, 2012 I know Damore doesnt have time for this shit, but I personally would be interested in them doing another tutorial video refuting the claims. Its not their job to refute claims, however, their past vids have been extremely informative.....and Im basically not going to take Joe Blows claims about a product if they arent from Damore 1 Team Flex Issues Low tuning > God 2011 CALI AS1 STATE CHAMP Link to comment Share on other sites More sharing options...
Miguels Posted December 5, 2012 Report Share Posted December 5, 2012 maybe they hate the dd-1 because it shows they have been tuning the amps wrong for years the 25+ years experience tuning amps just went to shit after the dd1 came out lol 2 my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Recommended Posts