98 s10 LOUD system!

[n8ball2013]

so lets see

you have negative ohm load

a 4000 watt alpine amp that they dont even make a 4000 watt amp. especially wired at 4 ohm

run at 4 ohm so you can have sound quality.

you turn up the gain as a volume

you have a ball of spaghetti for wiring.

your box is a prefab not custom

have high output gains in the dash

you add resistors to get negative load.

yeah this gotta be a troll thread. for someone who claims to be a bonafide car audio know it all you got a lot of issues listed.

[zack_e89]

Well guys, I wired my RF T2500bdcp to -17 ohms.......

[BastardRam ATX]

No, it is really impossible. As n8 said, Ohms are a measure of resistance. You cant have less than zero resistance.

Please just do a little bit of research before you try and argue that more on these forums. People here want to help you, that's what this forum is for. But if you come in here with the attitude of "I know everything because my dad used to be into home/car audio" or whatever, then you will not have a very good experience here.

I'm not trying to argue but Im sure you or someone else will correct but

It's really hard to have 0 ohms

Example 1dvc it would be .5 so you devide it by half half of .5 is .25 half of that is .125 half of that is .0625 half of that is .03125 and so on so it will never reach zero unles it's rounded to it's nearest tenth which in that case it would be 0 but if you don't round it it can be a number lik .000000235848

Hope it makes sense lol

So op listen to n8

No, I know that. Even in a short circuit, I don't think it is technically 0 ohms. Because whatever the electricity is shorting through will naturally have SOME resistance to it. I was just saying that it is impossible to have less than zero resistance.

[nodaddonttouchmethere]

I know your trying to help me, my dad said you could do it and he showed me and i believe most of what he says. And you would do the same if your dad said something like that to. Im glad for help cause im getting rid of this system and i need support on which speaker i could use or even amp. Not to make a i told you so form. Im 17 i know alot for 4 years i been doing this and if you hate then dont comment on it.

[OrangeJuiced]

Well guys, I wired my RF T2500bdcp to -17 ohms.......

Kinda pointless. It does the same output at 2 ohms...

[BastardRam ATX]

so lets see

you have negative ohm load

a 4000 watt alpine amp that they dont even make a 4000 watt amp. especially wired at 4 ohm

run at 4 ohm so you can have sound quality.

you turn up the gain as a volume

you have a ball of spaghetti for wiring.

your box is a prefab not custom

have high output gains in the dash

you add resistors to get negative load.

yeah this gotta be a troll thread. for someone who claims to be a bonafide car audio know it all you got a lot of issues listed.

Don't worry, we can fix this. My dad's a TV repair man, he's got the ultimate set of tools.

[zack_e89]

Well guys, I wired my RF T2500bdcp to -17 ohms.......

Kinda pointless. It does the same output at 2 ohms...

Really?

[n8ball2013]

since you obviously like to play games. You have til i put my daughter to bed tonight to either come clean and admit you were trolling or provide proof that negative impedance exists or i ban your account and ip

[Noel989]

No, it is really impossible. As n8 said, Ohms are a measure of resistance. You cant have less than zero resistance.

Please just do a little bit of research before you try and argue that more on these forums. People here want to help you, that's what this forum is for. But if you come in here with the attitude of "I know everything because my dad used to be into home/car audio" or whatever, then you will not have a very good experience here.

I'm not trying to argue but Im sure you or someone else will correct but

It's really hard to have 0 ohms

Example 1dvc it would be .5 so you devide it by half half of .5 is .25 half of that is .125 half of that is .0625 half of that is .03125 and so on so it will never reach zero unles it's rounded to it's nearest tenth which in that case it would be 0 but if you don't round it it can be a number lik .000000235848

Hope it makes sense lol

So op listen to n8

No, I know that. Even in a short circuit, I don't think it is technically 0 ohms. Because whatever the electricity is shorting through will naturally have SOME resistance to it. I was just saying that it is impossible to have less than zero resistance.

[elflako17]

well tell your dad he is wrong coming from guys that play with amp's and sub's everyday as a living. not that they are trying to offend you but there is NO way in hell you can have -2 ohm.