Ben Taylor Posted January 11, 2013 Report Posted January 11, 2013 Can I drill my amplifiers on the back of my speaker box and have no problems ?
Hunters21w Posted January 11, 2013 Report Posted January 11, 2013 Very likely you will have problems down the road. Vibrations are one of the biggest killers of amps. 06 Police TahoeHU- Pioneer 80prsAmp- Crossfire 8kSub- 4 15" Crossfire xs v2sWire- 1/0 Knu/AudiotechnixAlt- 3 Mechman SMD 340sBatts- 6 XS Power 3100s, 2400
SLAYER1805 Posted January 11, 2013 Report Posted January 11, 2013 Lolz I bet I know what we were all thinking when we read the title. But yeah the vibrations from the box can shake components inside the amp loose and cause them to fail
SnowDrifter Posted January 11, 2013 Report Posted January 11, 2013 If your box doesn't flex, not an issue Mine is screwed to my box since it flexes the least out of anything in my car haha ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
ehall8702 Posted January 11, 2013 Report Posted January 11, 2013 You can but its like a buy one get one free for the dirtbags that rip off audio systems! ssnag a box and get a FREE amp and all kinds of fast like too. 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz
Recommended Posts
Archived
This topic is now archived and is closed to further replies.