Swordlordboy1234 Posted December 1, 2013 Author Report Share Posted December 1, 2013 Dang that's cool you can play that low. Like I said I kill 29, meh at 27. 26 last freq that is decent. 25 and below drops of the face of the planet. That's what I get with having really low port area haha XD (port plug) I dont pretend to know anything about box design. thats why you make friends with someone like BHE Mmm.. You have the 2 amps that I want haha.. Just out of curiosity, how is your voltage? Is the CT2500 wired to .5? Im asking because Ill be running similar power within the next few months.. Just at 1 ohm lol -Being that I'm picky id say my voltage is good/ok. But others might say its great considering. Ill take a video of it on a few different songs tomorrow if i have time. Basically if I'm revving i hold between 13.6 to 12.8 depending on the note. After i upgrade the batteries and the alternator i hope to hold those same voltages at IDLE not revving I can't really open it up at idle.. it protects the amp because of a spike of low voltage. The CT amps have a very sensitive protect circuit. I doubt my battery ever touched below 11.0 and I've protected it. So needless to say i don't turn it up past 60% on the LC1 unless I'm driving. Only notes i can play at idle are between 33-35. I guess thats where IMP rise is the highest because i hold around 12.6 at idle full tilt at those notes and don't protect. But when I'm not showing off i can drive around town 144+db and hold 14.1 volts which is great. I estimate the 144 because thats what it was full tilt before all of this, and it sounds about the same as that. Im still learning the system. But the bass portion is 100% done. Next stages are to get my doors to where i can hear them again. (i can't hear a damn thing when my bass is all the way up). Get my DC alternator and my XS power batteries maybe toss a OFC big 3 in there instead of CCA and then start on my mechanical and cosmetic fixes. On a side note. Anyone at turkey drag will not believe this is 2 12's in a trunk car. 28-36hz is stupid in it. Ive herd 2 18's walled, 2 15's walled. and many other non walled systems no where near as loud as this one sounds. You never know what it will put up with numbers but its DAMN impressive to the ear if i do say so myself. I can't wait to see if people agree with me. Again OUT OF A TRUNK, on TWO 12's I still can't get over it. Thanks again for all the comments guys. I hope for more! it really makes all this work worth it to see the positive feedback. I believe it, xfl's get fucking looooow. I did a full tilt 23hz hair trick on my wife the other day. But I can only play that low with one window down. The subs unload bad with both down. Cant wait to hear what you think of them in my trunk, i know its nothing like your 8 XFL's on 14+k but I'm happy with them. Weather permitting of course. My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
bighossf150 Posted December 1, 2013 Report Share Posted December 1, 2013 Try out taking chances decafed. Gets loooww Used to have a loud truck 2009 Corvette Z06, H/C/I, 150 shot, g force tune, 730rwhp/690rwtq 2013 F-150 limited, MPT Tune, leveled on 35"s Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted December 1, 2013 Author Report Share Posted December 1, 2013 Try out taking chances decafed. Gets loooww One of my favorite songs bro. But that low low low note in takin chances scares me with the XFL's… i know they are beasts but they move like 3 inches peak to peak on that note. My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
bighossf150 Posted December 1, 2013 Report Share Posted December 1, 2013 I can play it with no problems as long as I have one window shut and I'm tuned to 33. But that is about as low as I can safely play. Used to have a loud truck 2009 Corvette Z06, H/C/I, 150 shot, g force tune, 730rwhp/690rwtq 2013 F-150 limited, MPT Tune, leveled on 35"s Link to comment Share on other sites More sharing options...
DubNDodge Posted December 1, 2013 Report Share Posted December 1, 2013 Looks like it goes down to 21hz. '01 Dodge Stratass Sealed Trunk Build Log 2008 Honda Fit Sport Build Log On 10/3/2013 at 10:00 AM, ROLEXrifleman said: Anyone who says they knew everything they wanted out of life at 19 can go suck a bag of dicks cause they are lying to themselves or brought up in a cult. Link to comment Share on other sites More sharing options...
Bump4life Posted December 1, 2013 Report Share Posted December 1, 2013 getting low!! almost there man!! nice work on sealing!! Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted December 1, 2013 Author Report Share Posted December 1, 2013 I can play it with no problems as long as I have one window shut and I'm tuned to 33. But that is about as low as I can safely play. I gotta test that window down door open left arm raised stuff to see how my car reacts... I haven't had time. When you get your demo I'll be sure to give you like a 5 minute demo and test some stuff Looks like it goes down to 21hz. Yeah I was gonna say, it seems way lower then 23hz. I guess that 21hz note is the one that makes my subs cry..but I guess I can't complain too much. I am giving them double power. And it still is 21 fucking hz lol. getting low!! almost there man!! nice work on sealing!! Thanks Daniel. I like to think this is my best rebuild yet! ..... Sadly it might be the last rebuild for this car until i graduate. At least rebuild for audio wise. My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
soundstream15 Posted December 2, 2013 Report Share Posted December 2, 2013 Good work Jeff!! Glad your build is working out as you wanted it to! I ordered my ct sounds 1400 Damn pure amp was just to shitty Link to comment Share on other sites More sharing options...
Agreene Posted December 2, 2013 Report Share Posted December 2, 2013 so that tenny alt still going huh ? Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted December 2, 2013 Author Report Share Posted December 2, 2013 so that tenny alt still going huh ? No sir. It just has jack for idle output and USACI doesn't let me rev my engine. Plus its a tenney and I don't trust it. But I have to admit its prob the best alternator tenney ever built lmao.. My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.