Piggi3 Posted March 5, 2013 Report Posted March 5, 2013 Can i strap 2 ab 1100.1 at .5 ohm for daily. I have alot of rise currently with 1 ab1100.1 at.5 ohm is rising to 3ohm. Would it be okay 117volt 40amps on the clamp. Iirc.
SnowDrifter Posted March 5, 2013 Report Posted March 5, 2013 LOL If you have to ask..... Try strapping it at 2 ohms instead for daily ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
n8ball2013 Posted March 5, 2013 Report Posted March 5, 2013 strapped at .5 each amp will see .25 they may intsa protect. I wouldnt be trying it. my balls aint that biug. THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
deathcards Posted March 5, 2013 Report Posted March 5, 2013 11.7 volts your lucky you haven't fried that amp yet why would you need another work on your electrical first skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps
Kyblack76 Posted March 5, 2013 Report Posted March 5, 2013 You must have THOUSANDS in electrical to even think about that...... what do you have?!? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
CJSmith Posted March 5, 2013 Report Posted March 5, 2013 Umm, what do you intent on powering with 2 1100.1's strapped at .5?! *Rebuid in progress*
fox_racin4 Posted March 5, 2013 Report Posted March 5, 2013 11.7 volts your lucky you haven't fried that amp yet why would you need another work on your electrical first Reading> you Dont strap the amps. Thatll make them protect easier Whats your electrical? I had 3 at .35ea and they would protecr but i have very little rise 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole
Kyblack76 Posted March 5, 2013 Report Posted March 5, 2013 Umm, what do you intent on powering with 2 1100.1's strapped at .5?! Utah SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
fox_racin4 Posted March 5, 2013 Report Posted March 5, 2013 Lots a SPL guys will burp them at .25 ( 2 amps) And tey are fine ( on 2 batts as well) But they know their rise and everything 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole
SnowDrifter Posted March 5, 2013 Report Posted March 5, 2013 Let me put it this way: you are asking if it is safe to put the amps at a quarter ohm each daily - because you are scared to actually try it or something. Here's the thing: .25 daily is a bad idea no matter how you spin it. So if you are going to try it, you won't be doing it "safely." You will be doing it at your risk, so make sure you have an extra 1000 bucks laying around to repair those amps and don't cry if/when it breaks lol ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Recommended Posts
Archived
This topic is now archived and is closed to further replies.