OrionStang Posted June 5, 2013 Author Report Posted June 5, 2013 Finally got the deck installed. While setting the gains (dd-1), the pots on my 4-channel are way off. I know how much gain "doesn't matter", but usually the knobs are pretty close to the same on a 4-channel. These are way off. Whats more concerning is that the one that is higher is for the tweeters. Dont want to blow them. SMD Super Seller My Feedback Thread
IH8PunkRok Posted June 5, 2013 Report Posted June 5, 2013 Then turn the pot down.... You don't gain distortion by turning things down -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build
OrionStang Posted June 5, 2013 Author Report Posted June 5, 2013 I know that. I did turn it down to match the other, safest way, I guess. But still confusing. Every other h/u 4chan combination i've ever used, the gains are nearly the same. SMD Super Seller My Feedback Thread
OrionStang Posted June 5, 2013 Author Report Posted June 5, 2013 Figured it out. The hpf on the "high" rca's only goes down to 1.25khz. So its not sending a full signal at 1khz. Hence, needs more gain. Damn this deck LOL. SMD Super Seller My Feedback Thread
n8ball2013 Posted June 5, 2013 Report Posted June 5, 2013 Tell me why im anti pioneer again? THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
Kyblack76 Posted June 5, 2013 Report Posted June 5, 2013 GOOD BOY... i was gonna say........ with 5volt preouts... something else is the issue... GOOD BOY !! SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Kyblack76 Posted June 5, 2013 Report Posted June 5, 2013 Tell me why im anti pioneer again? You shush.... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Kyblack76 Posted June 5, 2013 Report Posted June 5, 2013 Figured it out. The hpf on the "high" rca's only goes down to 1.25khz. So its not sending a full signal at 1khz. Hence, needs more gain. Damn this deck LOL. Is the thing to do, is set up with DD1's on standard mode,... then switch to network??? Thoughts? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
OrionStang Posted June 5, 2013 Author Report Posted June 5, 2013 Tell me why im anti pioneer again? Haha, Kinda remembering why I always was, too. GOOD BOY... i was gonna say........ with 5volt preouts... something else is the issue... GOOD BOY !! Just gotta be smarter than the machine LOL. SMD Super Seller My Feedback Thread
OrionStang Posted June 5, 2013 Author Report Posted June 5, 2013 Figured it out. The hpf on the "high" rca's only goes down to 1.25khz. So its not sending a full signal at 1khz. Hence, needs more gain. Damn this deck LOL. Is the thing to do, is set up with DD1's on standard mode,... then switch to network??? Thoughts? Or use the the "mids" rca to set both gain pots on the 4 channel. SMD Super Seller My Feedback Thread
Recommended Posts
Archived
This topic is now archived and is closed to further replies.