purplesyrup Posted June 11, 2013 Author Report Share Posted June 11, 2013 HAHAhAH, just heard about the fucking rice, ROFLL mario called it out its at the end of the video Link to comment Share on other sites More sharing options...
White Lightning Posted June 11, 2013 Report Share Posted June 11, 2013 Awesome Vid Kenwood / HELIX / Linear Power (For The Love Of Music) / Brutal Sounds / OverKill Electric Co Questions About Sound Quality ?? Try Here ... Sound Quality, What does it REALLY mean ?? SMD SOTM Winner "White Lightning" 1997 GMT400 Chevy Silverado "The Green Dickle" 1994 GMT400 Chevy "Phantom Dually" Randal's 2007 Chevy Avalanche (we haven't named this one yet) Dylan's "Brutal" 17 Chevy Cruze RS Hatch Link to comment Share on other sites More sharing options...
SnowDrifter Posted June 11, 2013 Report Share Posted June 11, 2013 It lasted a while compared to others i have seen plugged in...It was at an odd impedance . A couple days ago I realized I had not checked the coils with a dmm . When I tested them ir was at 4.9 ohms. So at that point I was pretty much like wtf. I took the jumpers out and tested the coil indiuvidually vc 1 no reading vc 2 at 4.9 ohm. I honestly think a tensil lead may have been the reason and likely the sub what purchased that way brand ne2 because there was literally no play time on it and when peeking into the basket the coil was nice and shiny coppermy best idea of what power this took was likely in the 600w ish area. the sub could be smelled within 15 seconds of that power. the sub was unsellable is not reconable and was ruined already which is why we decided to just kill it because there was no use for it Sorry about spelling lol im on my phone. Psi may make a recone for this but I have no idea You fool!!!!!!!!! They do make recones lol, but they don't come as one piece, you have to get the voicecoil separate from the spiders and cone. And these handle 1000W RMS? how did 600W blow it????????? I run both of mine wired to 2-ohm loads @1000W RMS each......they don't cook like that lol Edit: My dumbass almost forgot that the wall-socket is AC current not DC..........lol so never mind about the power..... What comes out of your amp is AC too Wall power is just very dirty and can have a nasty dc offset sometimes too ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Raptorman Posted June 11, 2013 Report Share Posted June 11, 2013 She forgot to get rice apparantly. 1996 GMC Sonoma Four Fi BTL Neo 18's In 2:1 6th Order Bandpass 2 Ampere 5k's @ .5 TEAM FI TEAM #LITHIUMCANTDEMO On 10/20/2013 at 0:37 AM, KillaCam said: Fucking with a Prius driver is like making fun of a disabled kid. Pussies. Link to comment Share on other sites More sharing options...
purplesyrup Posted June 11, 2013 Author Report Share Posted June 11, 2013 She forgot to get rice apparantly. Iknoww man straight bullshit lol Link to comment Share on other sites More sharing options...
Dwn4BassAlan Posted June 11, 2013 Report Share Posted June 11, 2013 It lasted a while compared to others i have seen plugged in...It was at an odd impedance . A couple days ago I realized I had not checked the coils with a dmm . When I tested them ir was at 4.9 ohms. So at that point I was pretty much like wtf. I took the jumpers out and tested the coil indiuvidually vc 1 no reading vc 2 at 4.9 ohm. I honestly think a tensil lead may have been the reason and likely the sub what purchased that way brand ne2 because there was literally no play time on it and when peeking into the basket the coil was nice and shiny coppermy best idea of what power this took was likely in the 600w ish area. the sub could be smelled within 15 seconds of that power. the sub was unsellable is not reconable and was ruined already which is why we decided to just kill it because there was no use for it Sorry about spelling lol im on my phone. Psi may make a recone for this but I have no idea You fool!!!!!!!!! They do make recones lol, but they don't come as one piece, you have to get the voicecoil separate from the spiders and cone. And these handle 1000W RMS? how did 600W blow it????????? I run both of mine wired to 2-ohm loads @1000W RMS each......they don't cook like that lol Edit: My dumbass almost forgot that the wall-socket is AC current not DC..........lol so never mind about the power..... What comes out of your amp is AC too Wall power is just very dirty and can have a nasty dc offset sometimes too but doesn't the amperage and voltage remain the same? I dont know much about the amps lol, just woofers for now. Biomedical/Behavioral Science Major, The (Self-Proclaimed) Undisputed-Homemade-Woofer-King Super-Neodymium-Woofer Build Log: The D4BA-V.2 http://www.stevemeadedesigns.com/board/topic/169236-diy-super-neodymium-woofer-build-log/?p=2475620 Fucking love Alan you goddamned fucking super nerd lol When Alan uses big words I don't understand It's warming up enough that the donut-punching cyclist douchenozzles are getting their two wheeled fagmobiles out. Everytime I see a guy driving a mini cooper I cant help but think he loves cock & (2/29/16)-My wife just bitched at me about throwing out things we don't really use. My response of well we don't really use your vagina so should we throw that out was evidently not the right response. I had to leave the room. I missed Alan. RIP 5/29/15 - I love you son. Link to comment Share on other sites More sharing options...
Mike Whitenton Posted June 12, 2013 Report Share Posted June 12, 2013 It lasted a while compared to others i have seen plugged in... It was at an odd impedance . A couple days ago I realized I had not checked the coils with a dmm . When I tested them ir was at 4.9 ohms. So at that point I was pretty much like wtf. I took the jumpers out and tested the coil indiuvidually vc 1 no reading vc 2 at 4.9 ohm. I honestly think a tensil lead may have been the reason and likely the sub what purchased that way brand ne2 because there was literally no play time on it and when peeking into the basket the coil was nice and shiny copper my best idea of what power this took was likely in the 600w ish area. the sub could be smelled within 15 seconds of that power. For what it's worth, P=V*V/R = 120*120/4.9= 2939W on one voice coil. When the second coil shorted to the first in a parallel(ish) way since it got louder, it would have been double that power. Link to comment Share on other sites More sharing options...
purplesyrup Posted June 12, 2013 Author Report Share Posted June 12, 2013 3k seems like a really high number but i did not clamp or bother doing any math, did not seem to have very much power Link to comment Share on other sites More sharing options...
HunterJohnson Posted June 12, 2013 Report Share Posted June 12, 2013 sick! Always wonderful to see a subwoofer on fire Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass Link to comment Share on other sites More sharing options...
CleanSierra Posted June 12, 2013 Report Share Posted June 12, 2013 Why the FUCK did she forget the Goddamned RIIIIIIICE!?!?!?! Great vid Purp, good shit The Great Rice Epidemic of 2013 on the other hand..tragic. I'm taking a moment of silence. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.