Jessica Posted October 11, 2016 Report Share Posted October 11, 2016 (edited) working on this car, this nut was like super fraking tight. Broke a 3/8" ratchet trying to get it off. Ended up using a 1/2" drive breaker and a cheater. That is when i found out it was spot welded in place. FML Edited October 11, 2016 by strangeduck 6 Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted October 11, 2016 Report Share Posted October 11, 2016 Welded holy shit what was that on? I busted all kinds of stuff trying to get the axle nuts off the front of a Honda one time. lol Quote 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
Jessica Posted October 11, 2016 Report Share Posted October 11, 2016 Welded holy shit what was that on? I busted all kinds of stuff trying to get the axle nuts off the front of a Honda one time. lol it was a honda this time too. a 14mm nut on a bracket bolted to the bell housing. Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Ahmed Johnson Posted October 11, 2016 Report Share Posted October 11, 2016 (edited) Edited October 11, 2016 by Ahmed Johnson 6 Quote Link to comment Share on other sites More sharing options...
3vil Posted October 11, 2016 Report Share Posted October 11, 2016 Welded holy shit what was that on? I busted all kinds of stuff trying to get the axle nuts off the front of a Honda one time. lolit was a honda this time too. a 14mm nut on a bracket bolted to the bell housing. I have a strange suspicion that nut wasn't meant to be removed, just the bolt that presumably threads into it from the opposite side. Quote Link to comment Share on other sites More sharing options...
Jessica Posted October 11, 2016 Report Share Posted October 11, 2016 Welded holy shit what was that on? I busted all kinds of stuff trying to get the axle nuts off the front of a Honda one time. lolit was a honda this time too. a 14mm nut on a bracket bolted to the bell housing. I have a strange suspicion that nut wasn't meant to be removed, just the bolt that presumably threads into it from the opposite side. yes, the bolt that was back behind a bunch of crap in a horrible spot that was a pain in the ass to get to and seemed the total opposite of what a reasonable person would try to remove. but, yes you are right Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
bcpballer64 Posted October 11, 2016 Report Share Posted October 11, 2016 I broke two 16mm sockets, two 3/8ths ratchets, a half inch breaker bar try to get my calipers unbolted a few months back, ended up tracking down some impact sockets and a better quality breaker bar to get it lol 1 Quote "The strongest reason for people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -- (Thomas Jefferson) Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted October 11, 2016 Report Share Posted October 11, 2016 3 Quote That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted October 11, 2016 Report Share Posted October 11, 2016 I broke two 16mm sockets, two 3/8ths ratchets, a half inch breaker bar try to get my calipers unbolted a few months back, ended up tracking down some impact sockets and a better quality breaker bar to get it lol I broke so many tools before I got an impact gun, Air tools make life so much easier. Quote That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
Ahmed Johnson Posted October 11, 2016 Report Share Posted October 11, 2016 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.