Amart88 Posted August 10, 2013 Author Report Share Posted August 10, 2013 Have you tried running them strapped and using the bad one as the slave to see if that works? Not yet, Don't really want to pull the woofers again, or do I need to? My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
Amart88 Posted August 10, 2013 Author Report Share Posted August 10, 2013 Does it have a Master/Slave switch? If so have you tried switching it back and forth while its on to see if it starts playing? Nope, will try that tomorrow. Making a list of things to try. Worst case. How much do used 3500's go for around here? or to get repaired? My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
tacomaguy1 Posted August 10, 2013 Report Share Posted August 10, 2013 The master/slave switch will do it if its on slave Something to try Team Flex Issues Link to comment Share on other sites More sharing options...
tacomaguy1 Posted August 10, 2013 Report Share Posted August 10, 2013 Have you tried running them strapped and using the bad one as the slave to see if that works?Not yet, Don't really want to pull the woofers again, or do I need to? What is each amp wires to? 2 subs on each obviously Team Flex Issues Link to comment Share on other sites More sharing options...
Amart88 Posted August 10, 2013 Author Report Share Posted August 10, 2013 The master/slave switch will do it if its on slave Something to try EDIT: each amp is at 1 ohm. 2 woofers to each amp. dual 1's. I know they are both on master. Checked. I will try switching back and forth. Then I will strap them and at least get all 4 moving. I'm tired and exhausted so... strapped the amps are stable at 2 ohm? correct? all I do is runn the jumpers ans move my speaker wires to the correct spot? don;t neeed into the box. My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
tacomaguy1 Posted August 10, 2013 Report Share Posted August 10, 2013 I've strapped my 5500s at 1.3, so .66 each amp Team Flex Issues Link to comment Share on other sites More sharing options...
justin0943 Posted August 10, 2013 Report Share Posted August 10, 2013 what about your rca give them a look 02 dodge ram 1500 reg cab 3rd gen 2 sundown sd-2 d4 soundstream rub1.2500 amp all sky high car audio-fuse,fuse holder,wire,ring lugs and rca flex tech box design by Joe X supension-mcgaughys 2in drop spindal ,western chassis 6in flip kit,buddy custom c-notch 04 5.7l hemi motor swap and made it an slt eletric everthing youtube channel-http://www.youtube.c...43?feature=mhee http://www.stevemeadedesigns.com/board/topic/190882-02-dodge-ram-1500-3rd-gen/ Link to comment Share on other sites More sharing options...
tacomaguy1 Posted August 10, 2013 Report Share Posted August 10, 2013 How do you have the rca's? Input to one than pass through to the other one? I had mine like that and the one that was getting the rca off the hu didn't like it. Had to switch them and it was fine Team Flex Issues Link to comment Share on other sites More sharing options...
Amart88 Posted August 10, 2013 Author Report Share Posted August 10, 2013 How do you have the rca's? Input to one than pass through to the other one? I had mine like that and the one that was getting the rca off the hu didn't like it. Had to switch them and it was fine Yeah Mine come off the HU into first amp and then from first amps outputs into second. How do you have them now? My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 10, 2013 Report Share Posted August 10, 2013 I think, this was and HAS been a issue...... amp doctor time?? i dunno man. Such a shame... im sorry man SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.