Jump to content
Second Skin Audio

Tips for Building box for Hair Tricks


Hi-Po 5.0

Recommended Posts

Starting the build. Here we go. -.-

93' Exploder

Deck:Pioneer 6400-bt

Front Stage: Crescendo PWX 8"s and Skar Audio VX1-ST per door

Amps: Sundown Audio SAZ-3500 v1 @.375 ohm daily, CT Sounds 125.2

Subwoofer: Two PSI Platform 2 18"s,Fully Loaded D1.5's

Enclosure: B Pillar Fourth Order, 3:1 ratio tuned at 46 (Designed by Low Hertz Box Designs)

Wire: All Sky High Car Audio Cable!

Alternator: Singer 250 amp Hairpin

Batteries: XS Power D975

Team Audio Connections

Link to comment
Share on other sites

Thanks for the input tho everyone.

93' Exploder

Deck:Pioneer 6400-bt

Front Stage: Crescendo PWX 8"s and Skar Audio VX1-ST per door

Amps: Sundown Audio SAZ-3500 v1 @.375 ohm daily, CT Sounds 125.2

Subwoofer: Two PSI Platform 2 18"s,Fully Loaded D1.5's

Enclosure: B Pillar Fourth Order, 3:1 ratio tuned at 46 (Designed by Low Hertz Box Designs)

Wire: All Sky High Car Audio Cable!

Alternator: Singer 250 amp Hairpin

Batteries: XS Power D975

Team Audio Connections

Link to comment
Share on other sites

If total number of internal volume is 87.33% of the total numbe of all speakers FS, divide the sqaure root of the port area.

If not, take the voltage of amplifier output, and subtract the sqaure inches of 2/3's the baffle only.

It's easy dude.

15.4 cubes net. 2 18s, fs 24.5.

93' Exploder

Deck:Pioneer 6400-bt

Front Stage: Crescendo PWX 8"s and Skar Audio VX1-ST per door

Amps: Sundown Audio SAZ-3500 v1 @.375 ohm daily, CT Sounds 125.2

Subwoofer: Two PSI Platform 2 18"s,Fully Loaded D1.5's

Enclosure: B Pillar Fourth Order, 3:1 ratio tuned at 46 (Designed by Low Hertz Box Designs)

Wire: All Sky High Car Audio Cable!

Alternator: Singer 250 amp Hairpin

Batteries: XS Power D975

Team Audio Connections

Link to comment
Share on other sites

So box either has to be tuned high (35) 222 inches of port area, and on the smaller side of reccomended box size (6cubes a pc) or big box tuned low but with 178 of port area. Whats the better trade off? More port area or lower tuning.

93' Exploder

Deck:Pioneer 6400-bt

Front Stage: Crescendo PWX 8"s and Skar Audio VX1-ST per door

Amps: Sundown Audio SAZ-3500 v1 @.375 ohm daily, CT Sounds 125.2

Subwoofer: Two PSI Platform 2 18"s,Fully Loaded D1.5's

Enclosure: B Pillar Fourth Order, 3:1 ratio tuned at 46 (Designed by Low Hertz Box Designs)

Wire: All Sky High Car Audio Cable!

Alternator: Singer 250 amp Hairpin

Batteries: XS Power D975

Team Audio Connections

Link to comment
Share on other sites

If total number of internal volume is 87.33% of the total numbe of all speakers FS, divide the sqaure root of the port area.

If not, take the voltage of amplifier output, and subtract the sqaure inches of 2/3's the baffle only.

It's easy dude.

15.4 cubes net. 2 18s, fs 24.5.
I hope you know he was joking or at least I'm 99% sure he was

750??! Yeah, fuck that. Fuck this website, fuck SMD, fuck Steve, fuck all of his butt buddy mods, and their couches.

^ DON'T BE A DICK LIKE THIS GUY :)

Team Subsonic Lows

Link to comment
Share on other sites

Well wall is built. 15 cubes net, 222 port area, tuned at ~31

93' Exploder

Deck:Pioneer 6400-bt

Front Stage: Crescendo PWX 8"s and Skar Audio VX1-ST per door

Amps: Sundown Audio SAZ-3500 v1 @.375 ohm daily, CT Sounds 125.2

Subwoofer: Two PSI Platform 2 18"s,Fully Loaded D1.5's

Enclosure: B Pillar Fourth Order, 3:1 ratio tuned at 46 (Designed by Low Hertz Box Designs)

Wire: All Sky High Car Audio Cable!

Alternator: Singer 250 amp Hairpin

Batteries: XS Power D975

Team Audio Connections

Link to comment
Share on other sites

Abd then

THERE IS NO BUILD LOG!

1998 Chevy Silverado ext cab

Alpine CDA-9887

4 Team Fi 15s

2 Ampere Audio TFE 8.0

2 Ampere Audio 150.4

3 Digital Designs CS6.5 component sets

Dual Mechman 370XP Elite alternators inbound!

8 XS Power d3400

6 XS power d680

Second Skin

Stinger

Tsunami Wiring

Sky High

A Real Voltmeter not a piece of shit stinger.

Link to comment
Share on other sites

need to think about the right build to cause the passenger seat to vibrate violently at 33hz. Then you wont have to worry about her hair doing the blowing.

Link to comment
Share on other sites

Abd?

93' Exploder

Deck:Pioneer 6400-bt

Front Stage: Crescendo PWX 8"s and Skar Audio VX1-ST per door

Amps: Sundown Audio SAZ-3500 v1 @.375 ohm daily, CT Sounds 125.2

Subwoofer: Two PSI Platform 2 18"s,Fully Loaded D1.5's

Enclosure: B Pillar Fourth Order, 3:1 ratio tuned at 46 (Designed by Low Hertz Box Designs)

Wire: All Sky High Car Audio Cable!

Alternator: Singer 250 amp Hairpin

Batteries: XS Power D975

Team Audio Connections

Link to comment
Share on other sites

And its a typo. You built a wall. What happened

THERE IS NO BUILD LOG!

1998 Chevy Silverado ext cab

Alpine CDA-9887

4 Team Fi 15s

2 Ampere Audio TFE 8.0

2 Ampere Audio 150.4

3 Digital Designs CS6.5 component sets

Dual Mechman 370XP Elite alternators inbound!

8 XS Power d3400

6 XS power d680

Second Skin

Stinger

Tsunami Wiring

Sky High

A Real Voltmeter not a piece of shit stinger.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1572 Guests (See full list)

×
×
  • Create New...