Miguels Posted February 15, 2014 Report Share Posted February 15, 2014 going to try the discount code.. just wondering if single 2/0 inputs can be used in a saz3500 Quote my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
CJ18 Posted February 16, 2014 Author Report Share Posted February 16, 2014 The single 1/0 will fit. Quote Link to comment Share on other sites More sharing options...
oldsoundguy Posted February 16, 2014 Report Share Posted February 16, 2014 That was cool to watch. I have a set of toolmaker 1/0 to 4 reducers I was going to use on my amp but then found out that 1/0 wire fits. I guess I will break them out and install them on the end of my power and ground. Thanks for the vid. Quote 80prs Arc Audio Xdi 1200.6 (using active crossovers) Freaking awesome amplifier Incriminator IA 10.1 Focal PS 130v 5.25 (doors) 4" Faital pro Neo (kick panels) 3" Faital pro Neo and focal tweets( dash) DC Audio level 3 12" custom box designed by joex built by me AGM front, XS 750SE batteries rear DC 180 alt 99 Toyota Tacoma extra cab http://www.stevemeadedesigns.com/board/topic/179476-my-small-build-turned-into-the-ongoing-build/ Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 16, 2014 Report Share Posted February 16, 2014 awesome video cody. I noticed about a .4 ish voltage gain with my dual inputs using way less sophisticated equipment.. But just tossing that in there to say that i did see and hear an improvement. Quote My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
CJ18 Posted February 16, 2014 Author Report Share Posted February 16, 2014 The 1/0 to 4ga may be different if used on a 1/0 input since the 4ga staub will have less contact area than the 1/0 to 1/0 does. Quote Link to comment Share on other sites More sharing options...
Miguels Posted February 16, 2014 Report Share Posted February 16, 2014 The single 1/0 will fit. i know the single will fit.. im looking to get 2/0 in there. Quote my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
CJ18 Posted February 16, 2014 Author Report Share Posted February 16, 2014 Ah, you need the 4/0 to 1/0 Quote Link to comment Share on other sites More sharing options...
Miguels Posted February 16, 2014 Report Share Posted February 16, 2014 yes sir Quote my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
P4killer_ Posted February 16, 2014 Report Share Posted February 16, 2014 Well that was an informative test. For the record I never said dual inputs were crap, but always wondered about the contact area. And now we have some definitive data.. which is nice. Its odd that the 1 to 1 connectors are quite a bit better. Alot more than 2w difference. In fact its more power less drop all with less current draw as well which mean higher efficiency. . Which is a big deal. With some practice you can easilly get bare wire to look perfect, but it is annoying. For my money for looks oalone its not worth it, but for the results you recorded it absolutely is. Ive been on the fringe of ordering a set of these for the longest time, but didnt wanna waste my money. I saw this thread and got excited to finally know the truth.. Thanks for the info. Quote Setup: 2010 Hyundai Elantra Factory Unit via 4 chan NVX LOC Excessive Amperage "H/O" Alt Xs D3400/ Xs XP3000 Big 3. 2 Runs of +, 2 Runs of - DD M3b and 2 12" AQ HDC4s Link to comment Share on other sites More sharing options...
CJ18 Posted February 16, 2014 Author Report Share Posted February 16, 2014 That one wasn't directed at you. I have had a lot of people question and out right tell me that they are useless because of "poor contact area". That was directed at them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.