Dwn4BassAlan Posted February 25, 2014 Report Posted February 25, 2014 So, I was going to start measuring out a couple wire cuts for the big 3 because I got the new battery tray in to replace the old acid destroyed one. I was going through my box of SCHA stuff (wires, lugs, heatshrink, and the fuse holders) which has been sitting in my door where it is cool and dry at all times in the box, and the fuse holders were still in the plastic ziplock bag unopened until today for the first time. I noticed what look almost like a mold/fungus in one of the block terminal holes, and had no idea what it was. I tried to see if it was a fungi of sort but it was hard as a rock when it tried scraping some out. Then I noticed it in all the block terminal holes against the back wall so I thought it might have been the cutting liquid from when these are made, but I'm not sure because it seems like it has been decaying my terminal blocks. There's already pits and holes in the walls of 3/4 blocks and a rust wash did not seem to stop much. Everything else in the box was amazing 100% great product, just wondering if anyone has any info on what this is? different terminal different terminal Biomedical/Behavioral Science Major, The (Self-Proclaimed) Undisputed-Homemade-Woofer-King Super-Neodymium-Woofer Build Log: The D4BA-V.2 http://www.stevemeadedesigns.com/board/topic/169236-diy-super-neodymium-woofer-build-log/?p=2475620 Fucking love Alan you goddamned fucking super nerd lol When Alan uses big words I don't understand It's warming up enough that the donut-punching cyclist douchenozzles are getting their two wheeled fagmobiles out. Everytime I see a guy driving a mini cooper I cant help but think he loves cock & (2/29/16)-My wife just bitched at me about throwing out things we don't really use. My response of well we don't really use your vagina so should we throw that out was evidently not the right response. I had to leave the room. I missed Alan. RIP 5/29/15 - I love you son.
CNF Kevosinn Posted February 25, 2014 Report Posted February 25, 2014 Its from when they plate the outside of the terminal. Mine look like that also. *** SuperSeller Status Verified *** ( http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers/ ) "kevosinn's" astro van 8 custom Sundown Zv4 18's 4 Sundown scv 6000's CNF Distribution CNC parts Skyhigh wire some batteries SMD Meters and tools used on the installhttp://www.stevemeadedesigns.com/board/topic/172877-kevosinns-vanwest-coast-skyhigh-car-audio-vehicle/ 16,000 watt walled silverado build.http://www.stevemeadedesigns.com/board/topic/161965-walled-silverado-4-hdc4-15s-4-crescendo-3500s-and-much-more/ 8,000 watt 1999 Subaru legacy outback. Build log here: http://www.stevemead...ru/page__st__60TEAM CNF Distribution
Dwn4BassAlan Posted February 25, 2014 Author Report Posted February 25, 2014 Its from when they plate the outside of the terminal. Mine look like that also. So the holes and pits that have formed in the side walls won't spread? I was wondering if they possibly use a zinc coating, it looks like nickel to me, might even be a nickel-zinc allow because the stuff looks pretty similar to the white rust that forms all over zinc plating. And it kind of looks like the early stages of the nickel plate corrosion, I might be wrong though, I'm just curious. Biomedical/Behavioral Science Major, The (Self-Proclaimed) Undisputed-Homemade-Woofer-King Super-Neodymium-Woofer Build Log: The D4BA-V.2 http://www.stevemeadedesigns.com/board/topic/169236-diy-super-neodymium-woofer-build-log/?p=2475620 Fucking love Alan you goddamned fucking super nerd lol When Alan uses big words I don't understand It's warming up enough that the donut-punching cyclist douchenozzles are getting their two wheeled fagmobiles out. Everytime I see a guy driving a mini cooper I cant help but think he loves cock & (2/29/16)-My wife just bitched at me about throwing out things we don't really use. My response of well we don't really use your vagina so should we throw that out was evidently not the right response. I had to leave the room. I missed Alan. RIP 5/29/15 - I love you son.
bassaholicsfl Posted February 25, 2014 Report Posted February 25, 2014 Most likely no it will not spread. The majority cause of this is some sort of humidity. I work with galvanized/ zinc coated metal all day. The only time I see stuff like that is when when store the pallets on top of each other the wood leaves that white residue. I'd just clean it up. Put some sort of grease or wd40 until use. 2001 Dodge Ram Quad Cab.
Rich Schenk Posted February 25, 2014 Report Posted February 25, 2014 Had one with a little of that in mine On 3/28/2014 at 4:22 PM, KyLar96 said: Its all about the music anyway..... Do a proper install, something your happy with, Fuck everyone else...... improve in time, where you can..... its not rocket science... Tiburon build //www.stevemeadedesigns.com/board/topic/174059-97-hyundai-tiburon-build-from-ramming-to-slamming-slow-5k-build/ 2000 Mountaineer build http://www.stevemeadedesigns.com/board/topic/186736-2000-mountaineer-build-from-ramming-to-slamming-part-iislow-5k-builddc-audio-americanbassxspowersingerarcaudiostingershcavideo-on-pg7/ 2000 Mercury Mountaineer: Electrical:Singer 360 hairpin powdercoated white alt, Big 4 double run 1/0 SHCA OFC, 4 runs 1/0 OFC SHCA, limitless 70ah, HU: Pioneer deh80prs interiors: Skar sk85.4 on sb acoustics neo dome tweeters 2 Mmats sq4100s on 4 silver flute 8s(4ohm) SUB Stage: 3 DC5K [email protected] on 6 ascendant audio mayhem 12s d1.4s fully loaded
Dwn4BassAlan Posted February 25, 2014 Author Report Posted February 25, 2014 I asked Jon on FB chat with the pics and he said it was leftover from the molding process. Even offered to send me new ones (and I quote) "we can send you out a different one if you want man. whatever you want is best for us just let me know" Glad to know the man cares about his customers so much, that's so rare these days it's a nice reminder some people still practice moral business. Biomedical/Behavioral Science Major, The (Self-Proclaimed) Undisputed-Homemade-Woofer-King Super-Neodymium-Woofer Build Log: The D4BA-V.2 http://www.stevemeadedesigns.com/board/topic/169236-diy-super-neodymium-woofer-build-log/?p=2475620 Fucking love Alan you goddamned fucking super nerd lol When Alan uses big words I don't understand It's warming up enough that the donut-punching cyclist douchenozzles are getting their two wheeled fagmobiles out. Everytime I see a guy driving a mini cooper I cant help but think he loves cock & (2/29/16)-My wife just bitched at me about throwing out things we don't really use. My response of well we don't really use your vagina so should we throw that out was evidently not the right response. I had to leave the room. I missed Alan. RIP 5/29/15 - I love you son.
Markous Posted February 25, 2014 Report Posted February 25, 2014 I've had that on some set screw terminals (not SHCA) cleaned it up pretty good with the male end of a battery post cleaner. '07 Ford Ranger - DM-608 I E700.4 I SA-CX6.5 v2 I SAZ-1500D 15th (x2) I Zv6 12" D1 I SB500-34 I JP40 I On 5/21/2015 at 7:07 PM, boom50cal said: of course he gives no fucks. it's a ford ranger. only bad mother fuckers drive ford rangers
Dwn4BassAlan Posted February 25, 2014 Author Report Posted February 25, 2014 I've had that on some set screw terminals (not SHCA) cleaned it up pretty good with the male end of a battery post cleaner. I tried a few things, even a steel wire brush can't really break off the pieces, but the white residue came off mostly. Biomedical/Behavioral Science Major, The (Self-Proclaimed) Undisputed-Homemade-Woofer-King Super-Neodymium-Woofer Build Log: The D4BA-V.2 http://www.stevemeadedesigns.com/board/topic/169236-diy-super-neodymium-woofer-build-log/?p=2475620 Fucking love Alan you goddamned fucking super nerd lol When Alan uses big words I don't understand It's warming up enough that the donut-punching cyclist douchenozzles are getting their two wheeled fagmobiles out. Everytime I see a guy driving a mini cooper I cant help but think he loves cock & (2/29/16)-My wife just bitched at me about throwing out things we don't really use. My response of well we don't really use your vagina so should we throw that out was evidently not the right response. I had to leave the room. I missed Alan. RIP 5/29/15 - I love you son.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.