shadowcaster Posted March 4, 2014 Report Share Posted March 4, 2014 Ok so i ordered a Mechman 170amp alt and 1 XS power 5100 to replace the stock components.here is a drawing of what i intend on running. All wire is Bullzaudio 1/0 The fuse between my alt and batt is 250A front and rear fuse are 250A fuse for sub amp is 200A fuse for 4chan is 25A Equipment- 1-1.2000D MB Quart Onx series@1ohm 1-Alpine Mrp-f240@4ohm I do intend on getting a 2nd XS for the rear but its gonna happen for a month or 2,and with having a stock Bosch batt up front ive read that mixing them would have bad results for 1 or both of the battery's which is why i chose to replace the front 1st.Thanks for the help in advance! 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
MECHMAN Posted March 5, 2014 Report Share Posted March 5, 2014 IMO you have the right idea but 4 fuses in the run going to the back. I would check to make sure that you don't have any voltage drop at the amplifiers and add another battery asap 1-888-MECHMAN www.Mechman.com [email protected] Link to comment Share on other sites More sharing options...
shadowcaster Posted March 5, 2014 Author Report Share Posted March 5, 2014 thank you sir.i will be contacting you for another d5100. 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
mothra Posted March 5, 2014 Report Share Posted March 5, 2014 please tell me you are removing all stock wiring if nothing changes, nothing changes You don't know what you don't know, till you don't know Link to comment Share on other sites More sharing options...
shadowcaster Posted March 5, 2014 Author Report Share Posted March 5, 2014 as in redoing the factory wires from batt to starter/alt/fuse box? Or adding the 1/0 + and - from mechman alt to my d51?<doing this ..didnt think i needed to replace the others 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
mothra Posted March 5, 2014 Report Share Posted March 5, 2014 fusing alt to battery is pointless if not removing factory wiring. i don't understand why people do this. agreed with earlier post, you have too many fuses. if nothing changes, nothing changes You don't know what you don't know, till you don't know Link to comment Share on other sites More sharing options...
shadowcaster Posted March 5, 2014 Author Report Share Posted March 5, 2014 Ok i see what you mean..nothing is done to the car yet,thank you for the input.Waiting on PA weather to cooperate 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
ChevyBoy95 Posted March 5, 2014 Report Share Posted March 5, 2014 please tell me you are removing all stock wiring actually, it is easier to leave stock wiring, and add on top of it. Leaving stock wiring doesnt hurt anything. edit: electricity will take the path of least resistance, so having the stock wiring along side upgraded added on 1/0 wiring wont hurt anything, and in reality, it helps ever so slightly (to the point of being negligible). Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/ Link to comment Share on other sites More sharing options...
shadowcaster Posted March 5, 2014 Author Report Share Posted March 5, 2014 Thanks guys will post pics friday evening i hope 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.