dolarbilz Posted April 3, 2014 Report Share Posted April 3, 2014 Have you test fitted these after 1st layer of fleece? If not I would recommend before dumping hours into sanding.thanks for sharing pics. Link to comment Share on other sites More sharing options...
CleanSierra Posted April 3, 2014 Author Report Share Posted April 3, 2014 Have you test fitted these after 1st layer of fleece? If not I would recommend before dumping hours into sanding.thanks for sharing pics. Yeah I test fit them on my truck. I also gave wiggle room on the mock up. It's to my advantage that I have the same A pillar in my truck that I can pop off and check fit. I even gave for clearance since the things will likely get rocked by his sub stage. I didn't want them smacking his windshield Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
dolarbilz Posted April 3, 2014 Report Share Posted April 3, 2014 Have you test fitted these after 1st layer of fleece? If not I would recommend before dumping hours into sanding.thanks for sharing pics.Yeah I test fit them on my truck. I also gave wiggle room on the mock up. It's to my advantage that I have the same A pillar in my truck that I can pop off and check fit. I even have for clearance since the things will likely get rocked by his sub stage. I didn't want them smacking his windshield Yes helps having same year vechicle for mock up.good work carry on Link to comment Share on other sites More sharing options...
CleanSierra Posted April 3, 2014 Author Report Share Posted April 3, 2014 Have you test fitted these after 1st layer of fleece? If not I would recommend before dumping hours into sanding.thanks for sharing pics.Yeah I test fit them on my truck. I also gave wiggle room on the mock up. It's to my advantage that I have the same A pillar in my truck that I can pop off and check fit. I even have for clearance since the things will likely get rocked by his sub stage. I didn't want them smacking his windshield Yes helps having same year vechicle for mock up.good work carry on Thank you, I appreciate the look and consideration to check for fitment. It WOULD suck to do all that work for a non fitting paperweight. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
dolarbilz Posted April 3, 2014 Report Share Posted April 3, 2014 Definitely sucks starting over I had to once.mainly cause of angle of drivers.. but resin breaks off those pillars some what easy to start over. Link to comment Share on other sites More sharing options...
CleanSierra Posted April 4, 2014 Author Report Share Posted April 4, 2014 I didn't have time to fill them after work today, but I shot them with gloss black after scuffing that primer. Stupid dust got in there, damn you Arizona! Apologies for the Shit lighting: Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
slamingsuburban Posted April 4, 2014 Report Share Posted April 4, 2014 damn they look good Link to comment Share on other sites More sharing options...
hdorre Posted April 4, 2014 Report Share Posted April 4, 2014 Oh my.. what a work of art.. On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread Link to comment Share on other sites More sharing options...
Smoove Posted April 6, 2014 Report Share Posted April 6, 2014 Damn nice work. 2 Team Fi 15's v1 2 DD M5's 970amps of Alt 6th order blowthroughThe truck Blowthrough build : http://www.stevemeadedesigns.com/board/topic/155555-smooves-1996-chevy-ext-cab-c1500-slow-build/The 350z build : http://www.stevemeadedesigns.com/board/topic/170694-smooves-2003-nissan-350z/ My FB page https://www.facebook.com/pages/Smooves-Car-Audio-and-performance/719746144805343 Team Fi Audio http://www.ficaraudio.com/ Link to comment Share on other sites More sharing options...
CleanSierra Posted April 6, 2014 Author Report Share Posted April 6, 2014 Thank you, I hope to get this one finished and the other one done this weekend. Then the hunt is on for material Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.