Jump to content
Sky High Car Audio

SkyHigh wire used in home?


Jessica

Recommended Posts

Posted

A guy at work in wanting to install a Whole House entertainment system in his house he is building. So all the wire will be in the walls. He got a quote from someone who does it for a living and they said the speaker wire is $1/foot but it will last forever because it's "oxygen free" and some other magical properties.

Unless it has something to do with housing codes i call bullshit.

Now, I just want to know, would skyhigh awg speaker wire hold up for 50 years in a wall of a house? because 100 ft of 14ga is like 14 bucks and this guy wants to run all the wire first and do the install himself to save some money. I don't want to tell him buy Skyhigh wire and then years from now he has issues.

I know it sounds like a dumb question and i'm sure the wire would be fine, i would just like some confirmation. thanks.

Posted

Skyhigh wire will work just fine. being that it's in a house though and he's likely to have long runs I would use 10awg or 12 awg.

That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.

Posted

The issue may be if the house is I nspected amd not up to code. I dont think its plenum rated for one. There are also certain codes that are supposed to be followed for fire resistance etc. I wemt through this when I did my home theater

THERE IS NO BUILD LOG!

1998 Chevy Silverado ext cab

Alpine CDA-9887

4 Team Fi 15s

2 Ampere Audio TFE 8.0

2 Ampere Audio 150.4

3 Digital Designs CS6.5 component sets

Dual Mechman 370XP Elite alternators inbound!

8 XS Power d3400

6 XS power d680

Second Skin

Stinger

Tsunami Wiring

Sky High

A Real Voltmeter not a piece of shit stinger.

Posted

Check mono price they have some good in wall wire. That's what I used for my home theater. Good and cheap.

On 3/28/2014 at 4:22 PM, KyLar96 said:

Its all about the music anyway..... Do a proper install, something your happy with, Fuck everyone else...... improve in time, where you can..... its not rocket science...

Tiburon build //www.stevemeadedesigns.com/board/topic/174059-97-hyundai-tiburon-build-from-ramming-to-slamming-slow-5k-build/

2000 Mountaineer build http://www.stevemeadedesigns.com/board/topic/186736-2000-mountaineer-build-from-ramming-to-slamming-part-iislow-5k-builddc-audio-americanbassxspowersingerarcaudiostingershcavideo-on-pg7/

2000 Mercury Mountaineer: Electrical:Singer 360 hairpin powdercoated white alt, Big 4 double run 1/0 SHCA OFC, 4 runs 1/0 OFC SHCA, limitless 70ah, HU: Pioneer deh80prs interiors: Skar sk85.4 on sb acoustics neo dome tweeters 2 Mmats sq4100s on 4 silver flute 8s(4ohm) SUB Stage: 3 DC5K [email protected] on 6 ascendant audio mayhem 12s d1.4s fully loaded

Posted

Knukonceptz has speaker wire that is up to the proper code for in wall runs. Here's a link:

http://www.knukonceptz.com/productMaster.cfm?category=KL3%20Kable

$1/ft, back to square one.

The issue may be if the house is I nspected amd not up to code. I dont think its plenum rated for one. There are also certain codes that are supposed to be followed for fire resistance etc. I wemt through this when I did my home theater

Thats what i thought, housing codes. Ok, well, i'm not sure where to go from here. He has a quote for a whole house install and i just want to save him some money but i won't give him a go ahead on something unless i am 100% sure about it.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1843 Guests (See full list)

×
×
  • Create New...