wiring a lvl 4

[Stephen Raab]

So I'm trying to wire up my lvl 4 15 and I'm using 8ga shca wire..... how in the he'll do you fit 2 pieces of 8ga into these damn push terminals

[CJ18]

Strip it down more.

[zack_e89]

reducers

[never knows best]

4ga to 8ga wire reducer

http://www.knukonceptz.com/assets/productimages/SSGR0.JPG

[Stephen Raab]

What if I ran wires from the positive terminals and wires from the negative terminals to the points at the back of the box where I'm putting bolts through.... then a single wire from those bolts to the amp... this would be the same thing correct? And much easier than cramming 2 8ga wire into a small hole

[never knows best]

more wire = more resistance

ive used these ones and they work just fine-

http://www.ebay.com/itm/STINGER-S48ADAPTPT-CAR-STEREO-4-TO-8-GAUGE-AMP-AMPLIFIER-POWER-WIRE-REDUCER-/131138405575?pt=US_Car_Audio_Video_Connectors_Terminals&hash=item1e887544c7

[Broke_Audio_Addict]

What if I ran wires from the positive terminals and wires from the negative terminals to the points at the back of the box where I'm putting bolts through.... then a single wire from those bolts to the amp... this would be the same thing correct? And much easier than cramming 2 8ga wire into a small hole

Yes that will work fine.

[Stephen Raab]

I know it is more resistance but honestly how much will an extra 8-10 inches affect it. I'm assuming not much