JEFFYBOI Posted April 25, 2014 Report Share Posted April 25, 2014 So I been thinking hard about adding more of a mid bass to the system. I have no speakers in the back door panels and that's the first spot that came to mind. I don't know anything about custom door panels so any videos or advice where I can learn more how to do so would be very appreciated. I had in mind going with some 8s or maybe some stealth subs or something in the back door panels. Not real sure what to go with. I know behind the door panel I have at least around 5" to play with. I am somewhat of a budget builder so something reasonable in price with good results please. Thanks for anyone who gives helpful ( positive ) input/feedback. "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS Link to comment Share on other sites More sharing options...
Kevin M Posted April 25, 2014 Report Share Posted April 25, 2014 For a bang for your buck I would go with the peerless sls8. Or the 8" silver flute. Both are budget drivers with some kick ass output. How much power do you have on tap? http://www.madisoundspeakerstore.com/approx-8-woofers/silver-flute-w20rc38-04-ohm-8-wool-cone/ http://www.parts-express.com/peerless-830667-8-paper-cone-sls-subwoofer--264-1102 I would keep them lp under 300hz with a steep slope and deaden the rear doors really well. 2005 Ford Focus zx4 AMT's and Planars 18" Infinite baffle Link to comment Share on other sites More sharing options...
JEFFYBOI Posted April 25, 2014 Author Report Share Posted April 25, 2014 For a bang for your buck I would go with the peerless sls8. Or the 8" silver flute. Both are budget drivers with some kick ass output. How much power do you have on tap? http://www.madisoundspeakerstore.com/approx-8-woofers/silver-flute-w20rc38-04-ohm-8-wool-cone/ http://www.parts-express.com/peerless-830667-8-paper-cone-sls-subwoofer--264-1102 I would keep them lp under 300hz with a steep slope and deaden the rear doors really well. I like the look of those SLS 8s. I will send those door panels to there grave with how dead I plan to make them. I have pretty sufficient power ATM, so I wouldn't have a problem running those. 300Hz seems slightly on the high end but with a steep slope it should make a big difference. I will keep those in mind for sure. Thanks "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS Link to comment Share on other sites More sharing options...
JEFFYBOI Posted April 25, 2014 Author Report Share Posted April 25, 2014 Anyone got any good information on doing custom door panels? "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS Link to comment Share on other sites More sharing options...
OrionStang Posted April 25, 2014 Report Share Posted April 25, 2014 There's a whole section dedicated to fabrication and fiberglassing. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
JEFFYBOI Posted April 25, 2014 Author Report Share Posted April 25, 2014 I didn't find much in this section if this is what you a referring too. http://www.stevemeadedesigns.com/board/forum/22-interior-exterior-paint-detailing-washing-waxingtricks-of-the-trade/ You got a link? Yes I did search the forum "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS Link to comment Share on other sites More sharing options...
Noel989 Posted April 25, 2014 Report Share Posted April 25, 2014 That's the exterior and interior He said fiberglass and fabrication Here's the link http://www.stevemeadedesigns.com/board/forum/15-fabrication-fiberglass-etc/ Build Log - http://www.stevemead...-cruiser-el-pt/ Link to comment Share on other sites More sharing options...
OrionStang Posted April 25, 2014 Report Share Posted April 25, 2014 You don't even have to search! How long you been on here? You've never taken a moment to scroll down and see all the subforums of information available to you? Nah, you'd rather make a million threads. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
JEFFYBOI Posted April 25, 2014 Author Report Share Posted April 25, 2014 You don't even have to search! How long you been on here? You've never taken a moment to scroll down and see all the subforums of information available to you? Nah, you'd rather make a million threads. This thread was not specifically for just doing the door panels. I wanted some mid bass speakers and I seen mids and highs section so that's what I went with. I did scroll down actually, just not far enough I guess. Sorry I missed that section and I actually try to keep the threads down to a minimum. I have been a member for a few months now. "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS Link to comment Share on other sites More sharing options...
Sutliff Posted April 25, 2014 Report Share Posted April 25, 2014 So I been thinking hard about adding more of a mid bass to the system. I have no speakers in the back door panels and that's the first spot that came to mind. I don't know anything about custom door panels so any videos or advice where I can learn more how to do so would be very appreciated. I had in mind going with some 8s or maybe some stealth subs or something in the back door panels. Not real sure what to go with. I know behind the door panel I have at least around 5" to play with. I am somewhat of a budget builder so something reasonable in price with good results please. Thanks for anyone who gives helpful ( positive ) input/feedback. Hey ... I have been following the following thread, about 8" mid-bass drivers for almost a week now ... I think you will find some very good info in it. http://www.stevemeadedesigns.com/board/topic/186011-8-midbass-driver-suggestions/ Zeke '14 2003 Chevy Monte Carlo SS Vehicle Details & Mod List: http://www.stevemeadedesigns.com/board/garage/vehicle/1703-chevrolet-monte-carlo-ss/ Audio Build Log: http://www.stevemeadedesigns.com/board/topic/143276-2003-chevy-monte-carlo-ss-audio-build-ib-build Pioneer FH-P8000BT Infinity Kappa Perfect 6.1 Fi IB3 (Two 12", 2-ohm SVC) RF T400-2 & T500-1bdCP MechMan S Series 240A XS Power D3400 & D975 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.