meade916 Posted May 22, 2014 Author Report Posted May 22, 2014 drilled a hole in the seat bar and ran the wire down through it down to the bottom and put some removable connectors on both sides. This way i can still take the seats out and not have to cut the wire every time I would have done a molex plug but it's only 2 speaker wires on each side. Not enough to warrant a 9 pin molex BONUS PICS - i tossed the new SMD v2 on the back just to see what it would look like back there. The RZR is getting 2 Rockford Fosgate P2 10's so don't get all excited, i am NOT putting this in there. This is just for fun 1 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916
meade916 Posted May 22, 2014 Author Report Posted May 22, 2014 this video is 5 years old...i have had one of the I-beams for the entire time and wasn't sure what to do with it...because i wanted at least 2 of them. Well about 6 months ago i scored a 2nd one some how (they are discontinued). Now that i got the RZR a light bulb went off in my head and i was like "cheeea!". See i know it's going to be hard to get GOOD bass into the cabin being so wide open, so these are not only fun but will be functional too check out this old teeth rattling video from back in the day (to understand the ibeams a little better) 4 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916
ghostlyrich Posted May 22, 2014 Report Posted May 22, 2014 builds turning out pretty sweet man! Quote My youtube channel https://www.youtube.com/user/ghostlyrich Mazda 3 2006 Build (R.I.P) http://www.stevemeadedesigns.com/board/topic/172728-mazda-3-2006-stealth-build/ Volkswagen GTI 2011 Build http://www.stevemeadedesigns.com/board/topic/192979-vw-gti-2011-build/ Jeep 2015 Build http://www.stevemeadedesigns.com/board/topic/201493-my-new-jeep-2015/
bumpinTL364 Posted May 22, 2014 Report Posted May 22, 2014 "and it….sends waves…..of sound….through your seat….yeah" hahah steve. Dope build so far though, your installs are cleaner than the inside of a lysol factory! I can't wait till you get on that box! Keep it up man! Quote masterbation is free, and even saves you money.sorry but someone had to say itsorry, Jimmy...beat you to it (no pun intended) LOLDON'T get a wife. Best advice I never got, and now it's too late My build: 12" DCON in a dorm room. New/current build: 8" woofer, custom amplifier block, fiberglassed speaker pods
hershy314 Posted May 22, 2014 Report Posted May 22, 2014 Honestly the T3's look better than the T5's. Can't wait to see what else is planned for this thing. i like them both in their own ways but there is no denying which one sounds better I do have a question....how come you didn't go with a marine type speakers for the RZR? Wouldn't those take the abuse better? because it isn't a boat. Good point Quote http://athphotography.deviantart.com/ http://www.youtube.com/user/hershy314
JeremyN Posted May 22, 2014 Report Posted May 22, 2014 I have one of the Aura brand transducers and of 100 watts it is amazing. on and old build I had in my girls car ( out side no bass ... sit inside and you get the magic bass ) nice pick Quote 2 12" Jeff Vue Customs 1 set MB Quart FSB 216 in doors1 American Bass 100.1 on sub1 Hertz EP2 on doorsJVC deck IPOD controlStock 105 amp alt DD-1big 3new build in Chevy caviler http://www.stevemead...chevy-cavalier/last set up in the ZX2 http://www.stevemead...-current-build/old build log http://www.stevemead...-1998-ford-zx2/ Gold is the money of kings, silver is the money of gentlemen, debt is the money of slaves. Just my .02c that shop needs keep those doors open so they have to charge for it if people think 10k is a lot then they should get into other hobbies.. like masturbating, cause any hobby cost money to maintain Lol no, I'm smarter than that bro haha. Fool me once, shame on you, fool me twice..............go fuck yourself lol
goodvibez Posted May 22, 2014 Report Posted May 22, 2014 Man that IBeam is a pretty cool add on..like you said perfect for open cab...got feel that bump! Quote Funny how the people who have a louder system than you will usually give you a compliment about your setup because they know how much blood, sweat, time, and money you put into it. The people who criticize or try and one up you....have a p.o.s to no system at all and will tell you all about this "other" guys system! Saddley I'm sure if I meet this "other" guy...he will probably tell me he thinks your just as annoying as I think you are! I'm not compensating, just proud of fabricating! My build log: 10k center console with 4 DC Audio XL 10's powered by 2 DC Audio 5.0k amps 5 xs batteries and dual DC Power 300xps alts http://www.stevemeadedesigns.com/board/topic/169404-goodvibez-04-dmax-10k-center-console-w4-xl-10s-custom-5ksit-plays/page-19
PolishThunder Posted May 22, 2014 Report Posted May 22, 2014 (edited) Honestly the T3's look better than the T5's. Can't wait to see what else is planned for this thing. i like them both in their own ways but there is no denying which one sounds better I do have a question....how come you didn't go with a marine type speakers for the RZR? Wouldn't those take the abuse better? because it isn't a boat. That being said you ever think of doing a boat? That would be epic! Then after that you need to do a system in a plane, and then after that a submarine, the possibilities are endless!!!! I guess you are pretty busy with other projects already though Edited May 22, 2014 by PolishThunder 1 Quote
choicewhitemeat Posted May 22, 2014 Report Posted May 22, 2014 Awesome build as always. One question I always have on your builds (well this one and the Lexus) is how do you attach the fiberglass molds to the footwell so they don't move on turns/brake/acceleration? Are they just so well molded that the general shape holds them in place? Quote 2009 Nissan Maxima SV Super Black KH3 Hardwired Beltronics 955 Radar Pioneer DEH-M9400BH with Stock Bose Speakers Custom fiberglass HVAC display Nexus 7 Tablet w/ Custom Fiberglassed Magnet dock KnuKonceptz Big 3 and wiring 2 Alpine Type E 10's with Alpine MRP-M500 Build Log HERE
RossGo Posted May 22, 2014 Report Posted May 22, 2014 Most quality speakers are marine grade by their very nature. Just means that their fronts are water resistant for the most part. Most automotive speakers in doors will see more water (on the backs) than any boat speaker. Considering he won't be driving underwater, there is no real concern. The fronts will be fine, and the back won't really get wet Quote Yes I have a lot of stereo weight. I build for Smiles Per Gallon not Miles Per Gallon LOLZ My build - 1996 4Runner with 2 18s - 149+ in a sealed box (with radiators)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.