nvarano Posted June 26, 2014 Author Report Share Posted June 26, 2014 Love you too bae Link to comment Share on other sites More sharing options...
OrionStang Posted June 26, 2014 Report Share Posted June 26, 2014 Why are you acting this way? We try to give you an answer. Then, when you have it, you don't want to discuss it with us. Why did you even join up here, then? SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
nvarano Posted June 26, 2014 Author Report Share Posted June 26, 2014 @OrionStang Excuse me? There should be no "we" in your statement, you gave no advise. You are only trolling. Just stop posting on this thread. Link to comment Share on other sites More sharing options...
n8ball2013 Posted June 26, 2014 Report Share Posted June 26, 2014 Daisy chaining and strapping sre not the same thing strapping is strapping in a master/slave config. Daisy chaining uses the pass throughs on each amp to pass the rca signal through. THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
nvarano Posted June 26, 2014 Author Report Share Posted June 26, 2014 Thanks @n8ball2013 Link to comment Share on other sites More sharing options...
Guest Posted June 26, 2014 Report Share Posted June 26, 2014 @JeremyN I don't, but I now know the answer to the question I asked, and at the moment I am not interested in chatting. Trol Link to comment Share on other sites More sharing options...
nvarano Posted June 26, 2014 Author Report Share Posted June 26, 2014 This is exciting. If we keep this up I might have the biggest thread on the whole site Link to comment Share on other sites More sharing options...
MrSkippyJ Posted June 26, 2014 Report Share Posted June 26, 2014 @OrionStang Excuse me? There should be no "we" in your statement, you gave no advise. You are only trolling. Just stop posting on this thread. I certainly tried helping and you have since ignored everything I have said. I am still curious if you are strapping or daisy chaining. You might already have your answer, but it would be nice if you shared information with the rest of the community. Daisy chaining was something I was unfamiliar with until you asked about it. I would like to learn more as you suggested I might if I followed this thread. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
nvarano Posted June 26, 2014 Author Report Share Posted June 26, 2014 @MrSkippyJ daisy chain, through rca's Link to comment Share on other sites More sharing options...
MrSkippyJ Posted June 26, 2014 Report Share Posted June 26, 2014 In that case parallel 2 subs on each amp for a 1ohm nominal impedance. If you ever decided to strap your amps (if they are strappable, I don't think you ever stated what equipment you are using) then you would parallel 2 subs together, then series the 2 pairs to give the strapped pair of amps 2ohm nominal impedance. I would stick with daisy chaining, it seems that the general opinion is to avoid strapping when possible. Too many issues come up. With daisy chaining the only issue to deal with is gain and crossover matching. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.