rockFord_Expedition Posted April 1, 2015 Report Share Posted April 1, 2015 Hey OP, just some constructive criticism, so take it as an offering of help and don't get all butt hurt. This is a car audio forum, not 911, there is no emergency; no reason to bump your thread more than once in a day. I am not sure if you have read the forum rules but you will have a much better experience here if you find them and read. Again, just offering help so that you can get what you are looking for rather than getting your thread locked. Good luck. Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
Miguels Posted April 1, 2015 Report Share Posted April 1, 2015 people trying to get post count up for next both yo!!! my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted April 1, 2015 Author Report Share Posted April 1, 2015 Thanks and I aint gonna get butt hurt like some ppl would. Any help or criticism from this site will help me even if it has nothing to do with my thread. Just have not had any luck with some help with a design since I purchased this sub and wanted to have the box done already since I will have the sub tomorrow afternoon.Its just frustrating when you see many other box design help threads being answered with designs and yours is just getting looked over. I appreciate it tho and will read the forum rules. Im new so maybe thats the problem then. Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted April 1, 2015 Author Report Share Posted April 1, 2015 Im just anxious and ready to get the build started and havent bought the materials yet since I have no design at all for the new sub. Link to comment Share on other sites More sharing options...
Miguels Posted April 1, 2015 Report Share Posted April 1, 2015 looks like you have all the info you need.. use the torrez calculator and give it a shot. my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted April 1, 2015 Author Report Share Posted April 1, 2015 Well I would do that but unable to download the calcuator since Im on a tablet and not an actual computer. It fails everytime I try to download it. Thats why I asked if there was someone willing to do it for me. I forgot to put that into the original post my bad. Link to comment Share on other sites More sharing options...
Miguels Posted April 1, 2015 Report Share Posted April 1, 2015 if i have time tomorrow i will punch in some numbers my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted April 1, 2015 Author Report Share Posted April 1, 2015 @Miguels if ou do have the time thatd be cool. Im going to be spending quite a bit of time on the build due to OCD and trying to make things perfect ya know. Link to comment Share on other sites More sharing options...
audiofanaticz Posted April 1, 2015 Report Share Posted April 1, 2015 Max space available in my 2000 Ford Taurus trunk. Height: 14 in Width: 34 in Depth: 36 in Im assuming these numbers are the actual physical trunk size. I have built a box for the same body style already (im sure a different year though) but regardless the trunk has a very narrow and shallow opening. Getting a box in the trunk with the measurements you have listed will most likely not happen. You maybe can get it to fit in through the rear seat opening if you remove the bottom rear seat so the folding seats can lay flat as possible or you may have to pull the back rest part of the rear seat out as well. Then the only thing you are worried about is having enough clearance between the trunk floor and the piece of metal that comes down from the rear deck. My best advice before you build a box and go through possibly wasting a bunch of time and materials building it is to find a bunch of cardboard cut it and tape it together making a test box to your max dimensions prior to building the actual box. Link to comment Share on other sites More sharing options...
Joe X Posted April 1, 2015 Report Share Posted April 1, 2015 II's a custom woofer for which no one have t/s parameters, if you don't pull parameters you can't really know for sure what is good for and what's a good box for it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.