Broke_Audio_Addict Posted April 5, 2015 Report Posted April 5, 2015 I'd rather have more power available. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.
ALPINE408 Posted April 5, 2015 Report Posted April 5, 2015 http://education.lenardaudio.com/en/06_x-over_3.html Best summed up read I found and great graphics for setting xover points Have you ever had your woofers blown?
ALPINE408 Posted April 5, 2015 Report Posted April 5, 2015 Yes, but how much can the tweeter handle alone? The mid? How do yo plan on setting your gain for this headroom? Lulz Have you ever had your woofers blown?
ALPINE408 Posted April 5, 2015 Report Posted April 5, 2015 The xs-65 uses the x28 tweeters 100 watts rms Have you ever had your woofers blown?
catch 22 Posted April 5, 2015 Author Report Posted April 5, 2015 ^is this for each or the pair? The provided crossover must really hold back the power the power these things can handle
catch 22 Posted April 5, 2015 Author Report Posted April 5, 2015 Has anyone used the alpine "tune it" app? Haven't seen any helpful reviews on it. Sounds pretty sweet if it works. I like the idea of being able to control all my sound setting from my iPhone
ALPINE408 Posted April 5, 2015 Report Posted April 5, 2015 100 rms per tweet... Be aware set it up wrong at that power you will blow the tweeters FAST Never used the tune it app Have you ever had your woofers blown?
OrionStang Posted April 5, 2015 Report Posted April 5, 2015 Yes, but how much can the tweeter handle alone? The mid? How do yo plan on setting your gain for this headroom? Lulz 100 rms per tweet... Be aware set it up wrong at that power you will blow the tweeters FAST Never used the tune it app You laugh at my post, then back up exactly what I was saying. Your member title suites you well. SMD Super Seller My Feedback Thread
ALPINE408 Posted April 5, 2015 Report Posted April 5, 2015 Yet you are trying to troll me right now..... I do not back up your post one bit I have double the rms going to every speaker in my front stage setting audio levels on a dsp is the simplest adjustment there is If you want quality un distorted lowest THD highest efficiency you want all the head room you can get my warning is for setting his xover to low on the tweeters... The lower a tweeter is crossed over the less power they can handle. Below 6kHz the power rating of most dome, ribbon and bullet tweeters, reduces at -6dB/octave (1/4 power for each octave decrease). Eg. A tweeter rated at 40 Watts will only be capable of 10 Watts at 3kHz. I hope you have learned something today Have you ever had your woofers blown?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.