*HElp* /w running a clean signal throughout system (real pros only please)

[Mack187Murder]

Still very new to car audio instal. I've got the powering and grounding and fuses down now I'm onto signals for my system. After finding the best possible way for clean signals and functionality I will work on bridging speakers and whatnot. I've drawn up two diagrams of possible ways to wire my system.I'm only looking for help on how to produce the best signal and run a clean system off the equipment I have.

Please look at the diagrams I've drawn which will give u a better understanding of my overwhelmed mind.

First#1

im not even sure this is possible. But I was planning on using my jl HD 1200 amp preouts and run RCA's to my 4 channel which will then run 4 speakers. is this even possible? And if so is there a way to do it better to make the system sound nice.

Second#2

diagram is using rear PAC adapter RCA's to run sub amp and front PAC adapter rca to run 4 channel. I didn't go into detail about bridging speakers and subs or wiring in parallel or not because Im not at that stage yet. Wantedbto to get my layout first of how I was going to get clean proper signals to my amps.

is.

Third#3

scenario would be my PAC adapter allows me to run a new sub and amp keeping factory speakers and amp in tact. Now bear with me. This is theory. But i beleive the Bose amp has 4 channels or 4 sets of inputs or outputs or whatever. It takes a clean signal from head unit and then the amps crossover ****s it. So when u turn up your system dial the amp limits it so u dont blow your ****ty bose speakers. Can i remove this limiter by disconnecting highs or lows or left and rights. And Can I somehow get the amp to only play highs to runmy 4 speakers and tweeters. And just the gain on my sub amp to control the sub that way?

Thank you for your help in advance and any advice and critisiscm is welcome.

What do u think my best layout is?

[bigmizzle99]

First, Option #1 will work but you'll lose Fade ability. Use Option #2 to keep Fade.

I would choose Option #4..don't use the PAC adapter. If you have Bose HU, then there is also a Bose amp. Find the wiring harness that feeds the Bose amp. Determine which wires are the feed signals to the amp. (I have Bose and this is what I did). Then tap into these signals, and feed a JL Cleansweep. The Cleansweep then feeds your amps.

Tap into wires and splice...

[dbmode2]

Hello I started my lay out like this to cool

[Mack187Murder]

Thanks big99. Im out of money now so will have to go #2 route for now. I did order a PAC LOC as well as my pac adapter for head unit. Could throw that on the Bose amp rca ins to increase power output couldn't I?

When I'm back to baller status I'll be getting a new head unit and all new door speakers. Until that time gotta work with what u got.

[Broke_Audio_Addict]

If you want a clean signal ditch the factory head unit altogether and get an aftermarket one.

Basically all loc's give out a dirty signal.

[Broke_Audio_Addict]

Hello I started my lay out like this to cool

He said real pros only so that didn't include you.

[dbmode2]

Hello I started my lay out like this to cool

He said real pros only so that didn't include you.

yes it does include me why 10+years in this audio game here and as a bonus computer and electronic's as a career so like I said I am low key with you people

because of your jealous ways just to let you all know that. And have a nice day!

[Broke_Audio_Addict]

Hello I started my lay out like this to cool

He said real pros only so that didn't include you.

yes it does include me why 10+years in this audio game here and as a bonus computer and electronic's as a career so like I said I am low key with you people

because of your jealous ways just to let you all know that. And have a nice day!

Jealous?

Lmfao.

Oh yeah we all wish we had your amazing skills.

Speaking of your skills let's have a look again.

Screams pro to me.

[ChevyBoy95]

If you want a clean signal ditch the factory head unit altogether and get an aftermarket one.

Basically all loc's give out a dirty signal.

this, LOC's are gross.

[Mack187Murder]

Hello I started my lay out like this to cool

He said real pros only so that didn't include you.

yes it does include me why 10+years in this audio game here and as a bonus computer and electronic's as a career so like I said I am low key with you people

because of your jealous ways just to let you all know that. And have a nice day!

. I know i Just the student. And I'm blessed some of u are sharing years of wisdom with me......but I produced a list of qyestion which your only reply was.......that's how I did.......doesn't scream pro.......maybe best buy or future shop car audio installer........at best....