Anand Sayroo Posted June 12, 2015 Author Report Share Posted June 12, 2015 i got to the bottom of the problem. it was signal fading from the stock headunit but not I have a new problem lol... I swapped out the LC2i for the LC6i and now when the thing wouldn't turn off.. The only way it turns off is if i disconnect the rca wires from it. When i turn the car off everything shuts off except for the lc6i. when i unplug the rcas it turns off.. any suggestions? Link to comment Share on other sites More sharing options...
ChevyBoy95 Posted June 12, 2015 Report Share Posted June 12, 2015 Not what I meant as too much power. Meant it as it could be getting too much current and is trying to protect itself from further damage. That's what happened to a friend of mine. Once he fused the power wire to it, it stopped shutting off. Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/ Link to comment Share on other sites More sharing options...
ChevyBoy95 Posted June 12, 2015 Report Share Posted June 12, 2015 i got to the bottom of the problem. it was signal fading from the stock headunit but not I have a new problem lol... I swapped out the LC2i for the LC6i and now when the thing wouldn't turn off.. The only way it turns off is if i disconnect the rca wires from it. When i turn the car off everything shuts off except for the lc6i. when i unplug the rcas it turns off.. any suggestions? Well, im not sure about the LC6i, but I thought on the LC2i, you dont need a remote lead if you use the RCA's as the signal to turn on. Same with the LC6i? And why would you get the LC2i working, then immediately swap it? and have issues again? Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/ Link to comment Share on other sites More sharing options...
reedal Posted June 12, 2015 Report Share Posted June 12, 2015 i got to the bottom of the problem. it was signal fading from the stock headunit but not I have a new problem lol... I swapped out the LC2i for the LC6i and now when the thing wouldn't turn off.. The only way it turns off is if i disconnect the rca wires from it. When i turn the car off everything shuts off except for the lc6i. when i unplug the rcas it turns off.. any suggestions? Is the head unit powered off? Not sure what vehicle you have. If there's a time delay before the head unit cuts off and the rest of the car electronics then that could be it. A lot of the 2000 and up vehicles don't completely cut power until a door is opened or after like 10-ish minutes SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
firebirdude Posted June 12, 2015 Report Share Posted June 12, 2015 Well, im not sure about the LC6i, but I thought on the LC2i, you dont need a remote lead if you use the RCA's as the signal to turn on. Same with the LC6i? And why would you get the LC2i working, then immediately swap it? and have issues again? Signal Sense turn-on only works if you're using high-level inputs. OP, as reedal mentioned, give it some time and see if it shuts down. Also, let's make sure you DON'T have a remote turn-on connection into the LC6i, because you were troubleshooting or whatever. If you want to use the GTO feature, then don't connect a remote-in lead too. A random ignition source in the vehicle may also take some time to turn off, depending on where you tapped in. Link to comment Share on other sites More sharing options...
firebirdude Posted June 12, 2015 Report Share Posted June 12, 2015 And why would you get the LC2i working, then immediately swap it? and have issues again? And yeah.... what the heck man. Link to comment Share on other sites More sharing options...
islandpride684 Posted June 13, 2015 Report Share Posted June 13, 2015 Can you break down how everything is wired on the LC6i as far as inputs...where are you tapping into for the inputs...any pics would help also... Build Log http://www.stevemeadedesigns.com/board/topic/186921-blk9te-07-yukon-slo-mo-build/page-3?hl=%2Bblk9te#entry2881410 Link to comment Share on other sites More sharing options...
haskos1989 Posted April 3, 2018 Report Share Posted April 3, 2018 why don't u just use the other option where u wire the remote turn on for radio to lc2i does your lc2i stay off ? Link to comment Share on other sites More sharing options...
06RTCharger Posted April 3, 2018 Report Share Posted April 3, 2018 1 hour ago, haskos1989 said: why don't u just use the other option where u wire the remote turn on for radio to lc2i does your lc2i stay off ? I hope OP figured it out 3 years ago......lol Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.