SnowDrifter Posted June 18, 2015 Report Posted June 18, 2015 Or else ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
onyx1silverado Posted June 18, 2015 Report Posted June 18, 2015 i had a loose connection at my fuse on the battery side and it melted the holder on that side. Thank god i found it when i did. Even though everything is buttoned up nice and neat it should still be checked routinely. Pioneer AVH-P4200DVD Rockford Fosgate T5001 bd-cp 2 DC level 2 12's Focal Access Components in the front Focal Access Coax in the rear doors Rockford Fosgate Punch Boosted Rail 4 channel rms 4x75 XS Power D3400 under the hood Knuconceptz Ultra Fleks Power & Ground
Bship Posted June 18, 2015 Report Posted June 18, 2015 damn that's hot. Good reminder, I'll go out and check on my shit tomorrow. CARS 14 Sierra crew cab daily, Small build coming one of these days 69 C-10 fleetside in many pieces, won't be done till the end of time Last car '12 Focus with build log http://www.stevemeadedesigns.com/board/topic/165619-2012-focus-btl-15-crescendo-sundown-audio-control/
Broke_Audio_Addict Posted June 18, 2015 Report Posted June 18, 2015 Was this a done on purpose test or just a really shitty wiring job? That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.
SnowDrifter Posted June 18, 2015 Author Report Posted June 18, 2015 Was this a done on purpose test or just a really shitty wiring job? It was tight at one point. Stuff loosens over time ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Broke_Audio_Addict Posted June 18, 2015 Report Posted June 18, 2015 Was this a done on purpose test or just a really shitty wiring job?It was tight at one point. Stuff loosens over time Loctite. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.
Quintine Posted June 18, 2015 Report Posted June 18, 2015 Now i may just be an upside down Australian, but I get the feeling that the nut is the wrong colour! Prevent Nut Discolouration: Always ensure your nuts are held firmly. If you leave it till the last minute, it will only take a minute. Build Log - 4x12's Trunk Firing 6th
Miguels Posted June 18, 2015 Report Posted June 18, 2015 my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Miguels Posted June 18, 2015 Report Posted June 18, 2015 i use lock nuts my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
islandpride684 Posted June 18, 2015 Report Posted June 18, 2015 i use lock nuts X2 Build Log http://www.stevemeadedesigns.com/board/topic/186921-blk9te-07-yukon-slo-mo-build/page-3?hl=%2Bblk9te#entry2881410
Recommended Posts
Archived
This topic is now archived and is closed to further replies.