Triticum Agricolam Posted August 31, 2015 Report Share Posted August 31, 2015 Will this work for your space? 1.5 cu ft net airspace 27 sq in port area tuned to 33 Hz. "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
towncarblue Posted August 31, 2015 Author Report Share Posted August 31, 2015 wow , thats a preety nice box . is there any way to make less deeper than 13.5" ? would a port make the box less deep than 13.5"? if not... im'a go with this Link to comment Share on other sites More sharing options...
Joe X Posted August 31, 2015 Report Share Posted August 31, 2015 So here is a suggestion 12.5" in depth, power: to sub rated, amp subsonic filter to 28Hz, minimum port clearance 1 7/8", figure is just an assembly guide: Link to comment Share on other sites More sharing options...
towncarblue Posted August 31, 2015 Author Report Share Posted August 31, 2015 i need to go to my car and see if i can add .25 inches to the height and width unfortunately my car is not near me right now, its good on gas so a family member borrowed it will post when i do the measurements Link to comment Share on other sites More sharing options...
towncarblue Posted September 1, 2015 Author Report Share Posted September 1, 2015 well.... i just went into my friends honda accord. checked out the trunk and realized , i cant do either of these boxes. im losing too much trunk space , i go to costco alot and i need every inch i can . im so sorry for putting you all through this . i do plan to build one of these boxes for my pathfinder because these look like some perfectly tuned boxes , i always wanted to build a ported box and see what all the praise is about. my only option now is sealed . i have about 1.5 cuft after displacement . should i get a single si mag v3 or should i get two e-10's ? i know it wont go as deep as the ported box but which of these setups will go deeper / lower ? and to Triticum Agricolamcan i get the enclosure specifications for your sub box posted Link to comment Share on other sites More sharing options...
Triticum Agricolam Posted September 1, 2015 Report Share Posted September 1, 2015 If you want to go with a ported box you could fit a ported 10" in the space you have. Here are the specs you need to build the box I posted. I copied Joe X's spec sheet since it works so well: Enclosure Specs Fb = 33 Hz Vb = 1.5 ft^3 External Height = 15" External Width = 28" External Depth = 13-1/2" Port W x H = 2" x 13-1/2" Cut Sheet: Front = 13-1/2" x 24-1/2" Inner baffle = 13-1/2" x 23-3/4" Back = 13-1/2" x 26-1/2" Left/Right side = 13-1/2" x 13-1/2" Top/Bottom = 13-1/2" x 28" Front to Back Port 13-1/2" x 10" Left to Right Port 13-1/2" x 18-3/4" Here is a top view showing how everything is put together: "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
bigmizzle99 Posted September 1, 2015 Report Share Posted September 1, 2015 well.... i just went into my friends honda accord. checked out the trunk and realized , i cant do either of these boxes. im losing too much trunk space , i go to costco alot and i need every inch i can . im so sorry for putting you all through this . i do plan to build one of these boxes for my pathfinder because these look like some perfectly tuned boxes , i always wanted to build a ported box and see what all the praise is about. my only option now is sealed . i have about 1.5 cuft after displacement . should i get a single si mag v3 or should i get two e-10's ? i know it wont go as deep as the ported box but which of these setups will go deeper / lower ? and to Triticum Agricolam can i get the enclosure specifications for your sub box posted Just do what everyone else does and mock up a box out of cardboard and see how much room you can give to a sub. Then design around that Camaro SS Build Altima build 2.0 Altima build 1.0 Link to comment Share on other sites More sharing options...
towncarblue Posted September 1, 2015 Author Report Share Posted September 1, 2015 hmmm , ive read alot of praise for the sound solutions audio GCON 10" sub http://products.soundsolutionsaudio.com/index.php/product-information/gcon.html judging by its specs it does look like a small monster and its rated at 1 -1.25 cubes ported. let me plug in some torres numbers to see if its an option Link to comment Share on other sites More sharing options...
Joe X Posted September 1, 2015 Report Share Posted September 1, 2015 GCON 10" ported. A little harder to build but it can still be done, figure is just an assembly guide: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.