need help picking sub/design/ aero port.... got a big headache

[Triticum Agricolam]

Will this work for your space?

1.5 cu ft net airspace

27 sq in port area tuned to 33 Hz.

[towncarblue]

wow , thats a preety nice box .

is there any way to make less deeper than 13.5" ?

would a port make the box less deep than 13.5"?

if not... im'a go with this

[Joe X]

So here is a suggestion 12.5" in depth, power: to sub rated, amp subsonic filter to 28Hz, minimum port clearance 1 7/8", figure is just an assembly guide:

[towncarblue]

i need to go to my car and see if i can add .25 inches to the height and width

unfortunately my car is not near me right now, its good on gas so a family member borrowed it

will post when i do the measurements

[towncarblue]

well....

i just went into my friends honda accord. checked out the trunk and realized , i cant do either of these boxes.

im losing too much trunk space , i go to costco alot and i need every inch i can .

im so sorry for putting you all through this . i do plan to build one of these boxes for my pathfinder

because these look like some perfectly tuned boxes , i always wanted to build a ported box and see what all the praise is about.

my only option now is sealed . i have about 1.5 cuft after displacement .

should i get a single si mag v3 or should i get two e-10's ?

i know it wont go as deep as the ported box but which of these setups will go deeper / lower ?

and to

Triticum Agricolam

can i get the enclosure specifications for your sub box posted

[Triticum Agricolam]

If you want to go with a ported box you could fit a ported 10" in the space you have.

Here are the specs you need to build the box I posted. I copied Joe X's spec sheet since it works so well:

Enclosure Specs

Fb = 33 Hz

Vb = 1.5 ft^3

External Height = 15"

External Width = 28"

External Depth = 13-1/2"

Port W x H = 2" x 13-1/2"

Cut Sheet:

Front = 13-1/2" x 24-1/2"

Inner baffle = 13-1/2" x 23-3/4"

Back = 13-1/2" x 26-1/2"

Left/Right side = 13-1/2" x 13-1/2"

Top/Bottom = 13-1/2" x 28"

Front to Back Port 13-1/2" x 10"

Left to Right Port 13-1/2" x 18-3/4"

Here is a top view showing how everything is put together:

[bigmizzle99]

well....

i just went into my friends honda accord. checked out the trunk and realized , i cant do either of these boxes.

im losing too much trunk space , i go to costco alot and i need every inch i can .

im so sorry for putting you all through this . i do plan to build one of these boxes for my pathfinder

because these look like some perfectly tuned boxes , i always wanted to build a ported box and see what all the praise is about.

my only option now is sealed . i have about 1.5 cuft after displacement .

should i get a single si mag v3 or should i get two e-10's ?

i know it wont go as deep as the ported box but which of these setups will go deeper / lower ?

and to

Triticum Agricolam

can i get the enclosure specifications for your sub box posted

Just do what everyone else does and mock up a box out of cardboard and see how much room you can give to a sub. Then design around that

[towncarblue]

hmmm ,

ive read alot of praise for the sound solutions audio GCON 10" sub

http://products.soundsolutionsaudio.com/index.php/product-information/gcon.html

judging by its specs it does look like a small monster and its rated at 1 -1.25 cubes ported.

let me plug in some torres numbers to see if its an option

[Joe X]

GCON 10" ported. A little harder to build but it can still be done, figure is just an assembly guide: