ajsmoke Posted September 15, 2015 Report Posted September 15, 2015 (edited) Hi everyone The distortion light blinks It's not stable sometimes turning the gain down also sets the distortion light Pioneer headunit wired directly to the stock speakers Kicker 12s - sundown sax2000 Edited September 15, 2015 by ajsmoke Quote
diegoclass2010 Posted September 15, 2015 Report Posted September 15, 2015 Might be some bad rcas... change them and see if it improves Quote
reedal Posted September 15, 2015 Report Posted September 15, 2015 Does it blink constantly or only when you adjust the volume? Quote SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
xpoppadaddyx Posted September 15, 2015 Report Posted September 15, 2015 Steve has some great videos making sure you're doing it right, but I used Anthony's which was a little different so try this link. 9/8/2015 https://www.youtube.com/watch?v=9h53-w4PAKQ 9/8/2015 9/8/2015 Quote 2002 Chevy Trailblazer (Build) 2013 Nissan Altima (Build) Poppa's YouTube Channel Poppa's FB Page Poppa's Instagram
Kyblack76 Posted September 15, 2015 Report Posted September 15, 2015 It will blink slightly went turning the gain up. Your not looking for a blink. You look for a constant on. Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Rich Schenk Posted September 15, 2015 Report Posted September 15, 2015 Change the battery to a fresh new good battery like Duracell, energizer. Retest has weird issues if battery is getting weak. At least mine did. Quote On 3/28/2014 at 4:22 PM, KyLar96 said: Its all about the music anyway..... Do a proper install, something your happy with, Fuck everyone else...... improve in time, where you can..... its not rocket science... Tiburon build //www.stevemeadedesigns.com/board/topic/174059-97-hyundai-tiburon-build-from-ramming-to-slamming-slow-5k-build/ 2000 Mountaineer build http://www.stevemeadedesigns.com/board/topic/186736-2000-mountaineer-build-from-ramming-to-slamming-part-iislow-5k-builddc-audio-americanbassxspowersingerarcaudiostingershcavideo-on-pg7/ 2000 Mercury Mountaineer: Electrical:Singer 360 hairpin powdercoated white alt, Big 4 double run 1/0 SHCA OFC, 4 runs 1/0 OFC SHCA, limitless 70ah, HU: Pioneer deh80prs interiors: Skar sk85.4 on sb acoustics neo dome tweeters 2 Mmats sq4100s on 4 silver flute 8s(4ohm) SUB Stage: 3 DC5K [email protected] on 6 ascendant audio mayhem 12s d1.4s fully loaded
ajsmoke Posted September 16, 2015 Author Report Posted September 16, 2015 The battery is new and ill check the rca cable they look fine to me doe I notice the distortion comes on even setting the gain down maybe the head unit ? I'm thinking I'll disconnect the front speakers n see if that has anything to do I'll post a video of it Ina few Quote
reedal Posted September 16, 2015 Report Posted September 16, 2015 Does it blink constantly or only when you adjust the volume? Quote SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
ajsmoke Posted September 16, 2015 Author Report Posted September 16, 2015 (edited) Watch the video here https://goo.gl/IfKQzM Edited September 16, 2015 by ajsmoke Quote
ajsmoke Posted September 16, 2015 Author Report Posted September 16, 2015 Does it blink constantly or only when you adjust the volume? Sorry bro I don't think it's constantly you can check the video Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.