banginAltima Posted April 19, 2008 Report Posted April 19, 2008 I always thought that if your box is atleast the same distance from the back doors or whatever, that that would be fine. But your saying that is increasing the port... so if I have 4 four inch ports just say about 4 to 5 inches away from the back, so would thatincrease port length even though i don't have a slot port like the other guy Quote If you build it, db's will come... NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09). Competition Only Record Holder Trunk 0-500 watts---148.1 2006 Nissan Altima 3.5 SE Currently Rebuilding.... My 150db Plus Trunk Build I do box designs. [benH] 6:24 pm: clipping doesn't really hurt subs [benH] 6:24 pm: being an idiot is what blows subs
Torres Posted April 19, 2008 Report Posted April 19, 2008 SPL2K...just from reading some topics you've posted on, you have a LOT of tidbit info that a lot of people wouldnt know. like...i knew a basic rule of thumb about the distance, but i had no idea it'd somewhat lower the tuning on the box. just think it's pretty cool. ok...carry on Quote
BigPimpin91 Posted April 19, 2008 Report Posted April 19, 2008 yes. You are explaining it right and i understand. If your port opening is 6" tall (regardless of depth and length) and the edge of it is 6" from your tailgate or back of your car then the area between the tailgate and the back of the box becomes an extension of the port which will tune your enclosure much lower. example.... if your port is 20" long and the box is 18" tall then you port is now actually 38" long I completely understand that and it's 1:10 A.M. SPL2K...just from reading some topics you've posted on, you have a LOT of tidbit info that a lot of people wouldnt know. like...i knew a basic rule of thumb about the distance, but i had no idea it'd somewhat lower the tuning on the box. just think it's pretty cool. ok...carry on Yes, we need a "Michael Hughes tidbit's of info" sticky. "The Official SPL2K Thread of tidbit information that can save your ass when making boxes." Quote BigPimpin91's Banging Music
Decaf Posted April 19, 2008 Report Posted April 19, 2008 I always thought that if your box is atleast the same distance from the back doors or whatever, that that would be fine.But your saying that is increasing the port... so if I have 4 four inch ports just say about 4 to 5 inches away from the back, so would thatincrease port length even though i don't have a slot port like the other guy this usually occurs with slots ports running along the bottom, all the way across of the box facing the rear of the car in ur case it likely wouldnt be as noticable, but anytime you limit the air/slow it down u lower the tuning slightly Quote
wL<3bass Posted April 19, 2008 Report Posted April 19, 2008 I completely understand that and it's 1:10 A.M.Yes, we need a "Michael Hughes tidbit's of info" sticky. "The Official SPL2K Thread of tidbit information that can save your ass when making boxes." Gets my vote. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.