mike12 Posted July 17, 2016 Report Share Posted July 17, 2016 Hello I'm looking for a slotted port box design around 34hz for 2 sundown sa-12s. Its a trunk car and has max outside dimensions of 34"wide 15"height and the depth can be no greater than 22" Subs will be firing back towards trunk powered by an ampere 2000w amp, would like the port to be firing back as well. If anyone has designs or will help me create one i'd appreciate your help! Thanks! Link to comment Share on other sites More sharing options...
Joe X Posted July 18, 2016 Report Share Posted July 18, 2016 So here is a suggestion, power: to subs rated, amp subsonic filter to 28Hz, minimum port clearance 4 1/4", figure is just an assembly guide:NOTE: If building outside you need to build a cardboard dummy box to test fit in it's way inside. Link to comment Share on other sites More sharing options...
mike12 Posted July 18, 2016 Author Report Share Posted July 18, 2016 So here is a suggestion, power: to subs rated, amp subsonic filter to 28Hz, minimum port clearance 2 1/2", figure is just an assembly guide: Is the port extension suppose to be that short? Link to comment Share on other sites More sharing options...
Joe X Posted July 18, 2016 Report Share Posted July 18, 2016 Yes, as noted the figure is just an assembly guide, extensions are close to two inches. Link to comment Share on other sites More sharing options...
mike12 Posted July 18, 2016 Author Report Share Posted July 18, 2016 Yes, as noted the figure is just an assembly guide, extensions are close to two inches. ok i appreciate this design, if i wanted the port off to one side (still facing same way as subs) would i just add the length of the 2 extension pieces together? like this pic Link to comment Share on other sites More sharing options...
Joe X Posted July 18, 2016 Report Share Posted July 18, 2016 Not really, I will post that version (port on the side) later today. Link to comment Share on other sites More sharing options...
mike12 Posted July 19, 2016 Author Report Share Posted July 19, 2016 Not really, I will post that version (port on the side) later today. awesome, i appreciate it Link to comment Share on other sites More sharing options...
Joe X Posted July 19, 2016 Report Share Posted July 19, 2016 So here is a suggestion, port on the side, power: to subs rated, amp subsonic filter to 28Hz, minimum port clearance 4 1/4", figure is just an assembly guide:NOTE: If building outside you need to build a cardboard dummy box to test fit in it's way inside. Link to comment Share on other sites More sharing options...
mike12 Posted July 21, 2016 Author Report Share Posted July 21, 2016 Sorry to keep bugging you but i think im gonna go with the 2nd box but at 32 hz, do you just lengthen the port? Link to comment Share on other sites More sharing options...
ckeeler11 Posted July 21, 2016 Report Share Posted July 21, 2016 you probably wont hear a difference between the 32 hz and 34 hz box. would have to make the box bigger to maintain 4 cu. ft. and tune to 32. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.