ShadeTreeMechanic Posted March 27, 2017 Report Share Posted March 27, 2017 They won't know that they are shortened unless you tell them. lol awesome build tuned in for more! 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
Karkov Posted March 27, 2017 Report Share Posted March 27, 2017 LOOOOOOOOOOVE the updates. that piping along the side is awesome. Glad you are updating the springs in suspension also 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
Jb_ Posted March 27, 2017 Author Report Share Posted March 27, 2017 32 minutes ago, ShadeTreeMechanic said: They won't know that they are shortened unless you tell them. lol awesome build tuned in for more! When inspecting they lift the car and also inspect the suspension, shock absorbers and springs. Normally they have a flat end but after shortening them they dont havr anymore. Luckily the springs are placed in a bowl so they cant come out. The regulations on that arent very clear so hopefully the wont notice or allow it. Besides the springs im curious what they think about the rest of the car. Batteries, stripper pole,and lots of extra weight. Link to comment Share on other sites More sharing options...
Jb_ Posted March 27, 2017 Author Report Share Posted March 27, 2017 Today is saw there was water in my spare wheel compartment. Was unsure if it was caused by bottles that were in there that might have leaked or ive drilled a screw through the bottom. Didnt take any risk and decided to get the foam out. After drilling holes and cutting with a jigsaw i was still unable to take it out. There was a rubber leaking so im glad i took it out. Link to comment Share on other sites More sharing options...
tboorn Posted March 27, 2017 Report Share Posted March 27, 2017 build is looking awesome! if you never figured out how to change the title... unless they changed it.... all you need to do is go to your first post, click edit, and then advanced edit or whatever its called, from there you should be able to change the title and everything. keep up the sick work! Fidelity Built to Last Team Sound Asleep 24Runner Build Log: http://www.stevemeadedesigns.com/board/topic/196657-24runner-sleeper-system-lots-of-fi-neo-dd-focal-new-video-w-juicebox-lithium/ 2 x 12" Fi BTL N2 / 2 x 12" Fi BTL N3 2 DD M3b Maxwell 2.7V 3000F Supercapacitors Pioneer DEH-80prs Focal P165 V30 components Rockford Fosgate T-400.4 Link to comment Share on other sites More sharing options...
BP1Fanatic Posted March 28, 2017 Report Share Posted March 28, 2017 Leaking rubbers are definitely not a good thing...LOL! Love the pvc pipes for the wires! 2000 Toyota Solara SEV6, 200 amp alternator, Jensen VX7020, Hifonics American Warrior Taurus X, Hifonics American Warrior Centurion X, JBL Club 6500C, Power Acoustik XP2K-4102, Coustic Power Logic HT-612 in a BP4. Link to comment Share on other sites More sharing options...
Jb_ Posted March 29, 2017 Author Report Share Posted March 29, 2017 I planned to take a night off and only taking some measurments. You know, stuff to think about on how to build it and keep you from falling asleep:p A few hours later most of the internal bracing has been made After the port is in another bar wil be added supporting the port en the largest panel(back). Going for a 50mm top plate, 22mm port with a 66 mm bracing inside. Should look something like this Link to comment Share on other sites More sharing options...
Jb_ Posted March 29, 2017 Author Report Share Posted March 29, 2017 On 27-3-2017 at 11:54 PM, tboorn said: build is looking awesome! if you never figured out how to change the title... unless they changed it.... all you need to do is go to your first post, click edit, and then advanced edit or whatever its called, from there you should be able to change the title and everything. keep up the sick work! I tried this before and found out they changed it. Correct me if im wrong but i found somewere its now only avaible for premium members Link to comment Share on other sites More sharing options...
tboorn Posted March 29, 2017 Report Share Posted March 29, 2017 well thats lame Fidelity Built to Last Team Sound Asleep 24Runner Build Log: http://www.stevemeadedesigns.com/board/topic/196657-24runner-sleeper-system-lots-of-fi-neo-dd-focal-new-video-w-juicebox-lithium/ 2 x 12" Fi BTL N2 / 2 x 12" Fi BTL N3 2 DD M3b Maxwell 2.7V 3000F Supercapacitors Pioneer DEH-80prs Focal P165 V30 components Rockford Fosgate T-400.4 Link to comment Share on other sites More sharing options...
Jb_ Posted March 30, 2017 Author Report Share Posted March 30, 2017 Had the idea to get some tan while working outside. Wasnt as succesful as hoped. Sweat and mdf dust is a bad combination It was getting dark but couldnt resist to put a sub in to see how it looks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.