flashlight_65 Posted April 30, 2008 Report Share Posted April 30, 2008 i got this bad boy just sitting in its box along with another kicker 1/0 amp kit, a deka intimidator batt. for the system and have a 300 amp alt on the way. now the big question is what would a good amp be for it? i have plans for a second BTL (dual 2ohm) in the future im looking at about 3000 watts rms at 4 ohms/ 6000 watts at 1 ohm for around $1200. or am i asking a little too much? Quote My builds: my caddy my 'hoe friends impala Link to comment Share on other sites More sharing options...
slim8605 Posted April 30, 2008 Report Share Posted April 30, 2008 (edited) Are you planning to run it at 2ohm or .5ohm? Edited April 30, 2008 by slim8605 Quote 1998 Toyota Camry XLE V6Goldwood GW-S650/4 6.5sEA 200a alt2009 Lancer GTSStock Link to comment Share on other sites More sharing options...
flashlight_65 Posted April 30, 2008 Author Report Share Posted April 30, 2008 (edited) 4 ohms for now .5 in the future if there is anything out there thats stable that low Edited April 30, 2008 by flashlight_65 Quote My builds: my caddy my 'hoe friends impala Link to comment Share on other sites More sharing options...
flashlight_65 Posted April 30, 2008 Author Report Share Posted April 30, 2008 or would it be better to just get 2 amps? Quote My builds: my caddy my 'hoe friends impala Link to comment Share on other sites More sharing options...
wL<3bass Posted April 30, 2008 Report Share Posted April 30, 2008 or would it be better to just get 2 amps? 2. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
ChevyBoy Posted April 30, 2008 Report Share Posted April 30, 2008 preorder a sundown 5k Quote Link to comment Share on other sites More sharing options...
flashlight_65 Posted April 30, 2008 Author Report Share Posted April 30, 2008 how much are those going for? and what 2 amps do you think would fit the bill? i apprieciate the help Quote My builds: my caddy my 'hoe friends impala Link to comment Share on other sites More sharing options...
ChevyBoy Posted April 30, 2008 Report Share Posted April 30, 2008 http://www.stevemeadedesigns.com/board/ind...showtopic=20199 Quote Link to comment Share on other sites More sharing options...
Torres Posted April 30, 2008 Report Share Posted April 30, 2008 preorder a sundown 5k if you want to run em at .5 ohms, that's your best bet. those amps can be run at .5 ohms daily with no modification. just have a good electrical, which looks like you have under control, maybe a few more batts. otherwise you're gonna need 2 amps that are between 2-4k watts RMS @ 1 ohm (depending on the options you got...which i'm sure is fully loaded) Quote Link to comment Share on other sites More sharing options...
flashlight_65 Posted May 1, 2008 Author Report Share Posted May 1, 2008 what about a lanzar opti 6000? are they .5 ohm stable for daily? Quote My builds: my caddy my 'hoe friends impala Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.