Dallass05 Posted January 13, 2019 Report Posted January 13, 2019 Just got done installing my system. Everything works fine,but as I connect the bass knob to the amp a squeaky noise comes from the amp? Once I unplug it,it goes away. Any idea what it can be?
Ron36 Posted January 13, 2019 Report Posted January 13, 2019 Could be either the cable or the plug on the amp side, maybe see if u can barrow a buddies cable and see if the noise goes away. If not probably internal amp issue. 2022 Ford Maverick on 22’s Skar SK1500.1 on 4 Skar VD-8’s Mids Sundown Super tweeters, Skar TX 6.5 components on Skar SKM400.4 LC2 for audio control , XS Power D680 XS Series Extra Battery
Dallass05 Posted January 13, 2019 Author Report Posted January 13, 2019 Thanks for the input apparently you can't run the bass wire next to the power wire in the t1500
reedal Posted January 13, 2019 Report Posted January 13, 2019 Dont connect shit to your amp with it powered on SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
AaronT Posted January 1, 2020 Report Posted January 1, 2020 You're fine plugging a peq knob into a t1500 with it powered on
Recommended Posts
Archived
This topic is now archived and is closed to further replies.