Jump to content

1998 Camry Re-build (box Pics 9/27)


Recommended Posts

sorry AB ... i just don't know what you're saying :( could you explain it to me better?

I'm rather new to box building and techniques

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Link to comment
Share on other sites

The box with the blue ports is what you've got now. The red is the rear deck. The green is new ports from the deck down into the trunk. This would make your trunk like an enclosure. So you have an enclosure inside and enclosure. So it would be sort of a bandpass and since you have ported inside ported it would be a 6th order. From what I've read 6th orders are very very efficient, so if you could do this properly and get it tuned right you could possibly turn the amp down and help your electrical out a little by getting the same or close to the same output with less power.

Posted Image

HU: JVC KD-AVX1Speakers: Stock BlazerSub: 2 Mass Destruction Car Audio Sidewinder 12"Amp: Orion HCCA-D1200 @ 1ohm (600 RMS)Box: 3.0 cubes tuned to 35

Link to comment
Share on other sites

how does it sound?

your allready ported into the gabin dont worry about tryng much else at this point.

I told you it would be Loud lol

x2 no need for any tweaker shit like in the above pic ^^^


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

that looks cool. kinda like the front wave of the speaker is going into the cabin as well and not just the rear wave.

2006 F-150

4 DC XL M2 18's Walled Daily Driver

XS Power

4 DC 3.5kw

Team DC

Team S.P.L.

Lot of Audio Technix and 1/0

DC Audio Dealer

American Bass Dealer

XS Power Dealer

Audio Technix Dealer

DWRIGHT-1-1.jpg

Link to comment
Share on other sites

how does it sound?

your allready ported into the gabin dont worry about tryng much else at this point.

I told you it would be Loud lol

fuck yeah it pounds man! once my electrical is stable i an turn it up. gain is just under 1/2, and i never bass boost (the remote EQ knob) past 1/2 because of electrical. i can't wait for a good 14 volts. ....

when you get a chance hide all those wires

yep tonight!! ill get pics of course. i just hooked it up to test it :)

The box with the blue ports is what you've got now. The red is the rear deck. The green is new ports from the deck down into the trunk. This would make your trunk like an enclosure. So you have an enclosure inside and enclosure. So it would be sort of a bandpass and since you have ported inside ported it would be a 6th order. From what I've read 6th orders are very very efficient, so if you could do this properly and get it tuned right you could possibly turn the amp down and help your electrical out a little by getting the same or close to the same output with less power.

Posted Image

cool design, but honestly i'm happy with it for now - and the whole point of the box was to NOT cut into the car - using the speaker holes already there :)

tahnks though man ! thats pretty innovative

x2 no need for any tweaker shit like in the above pic ^^^

yep!

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Link to comment
Share on other sites

that wouldnt work, unless he completely sealed off the entire trunk.

I just got off the phone with him, he loves it, said its real low and real smooth, and gets LOUD.

he is extremly happy, now if we can get his voltage issues fixxed, he wil be slammin and even more happy.

I am extremly pleased he is soo happy, when my clients are happy, I am happy.

I cant wait to hear it.

Link to comment
Share on other sites

yep yep David!! You're right you did an amazing job, I'm more than happy! It's beyond the state of like feeling happy i'm just in a pleasant mood today satisfied you know? i know its just an audio setup but its my hobby and love so it's working - honeslty months of planning and SAVING

just for 1 15 - its harder than it looks. wiring was like 200 bucks for example ahah

thanks so much David - I'm trying to plan a trip to Steve' s house soon maybe we can all meet there and I can demo it off real fast?

It moves a BUNCH of air did i mention that?

after 10 minutes of having it running I like to put it near full tilt (as full tilt as i'm comfortable with because of voltage drops) and turnb your head back.

feel like your getting slapped with air and the cabin is real pressurized.

thanks David, and Steve, and Rusty.

i'ma PM derick for some stickers :)

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 659 Guests (See full list)

×
×
  • Create New...