Lowroll Posted February 4, 2010 Report Posted February 4, 2010 4WD but I don't think I've used it since I owned the hoemaybe once when I had stock wheels and I went "offroad" Nice. I just bought a 99 Tahoe & I was looking your build over for ideas. trying to plan a big install for it. I like your truck a lot. Current System: Pioneer 6900 HU Front Stage: (for now) Soundstream tarantula 5.25 in the doors Soundstream tarantula 4x6 in the dash Kenwood 400.4 for mids & highs Bass: 4 Soundstream RW-12's 2 Power Acoustik Stax 4000/1D's single chamber box, 2.65 cubes. Currently under the knife being bagged Rebuilding err'thang
iTech Posted February 4, 2010 Report Posted February 4, 2010 Looks clean, nothing exagerrated, and looks very balanced. My Official Feedback Thread PSN - tech2332 Games for PS3: Killzone 2, BattleField: Bad Company 2! Add me to play either!
C-Fizzy Posted February 4, 2010 Report Posted February 4, 2010 Looks beautiful Kasey! and how much is the 1000 bd goin for? might be interested under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
thehoe92 Posted February 4, 2010 Author Report Posted February 4, 2010 Nice. I just bought a 99 Tahoe & I was looking your build over for ideas. trying to plan a big install for it. I like your truck a lot. well thank you! 99's are the OBS but you can still get some basic ideas for tahoes out of it.. can't wait to see your build Looks clean, nothing exagerrated, and looks very balanced. yup I'm pretty happy with the stance right now but it will be lower in the near future Looks beautiful Kasey!and how much is the 1000 bd goin for? might be interested you got PM.. lol I didn't intend on my build being a for sale thread so I won't post up anything here due to rules Wouldnt be thehoe92 without teh purple
BeatBox Posted February 4, 2010 Report Posted February 4, 2010 well its not all done yet but the back end is dropped.I need to get drop shocks and still cut the bump stop bracket. I can fit just barely my pinky under the bump stop the front my buddy says if I drop, the offset of my rim will rip the fender off but the guy I bought the kit from had the same wheels but 305's and he said it was fine he just had to trim a little so the front and the back both have room to drop but so far so good. I now can fall into my front seat and not have to high step up into it and when I get out I have to stand up instead of falling out I'll have better pictures of the actual install later it doesn't look like much of a difference judging by the gap in the wheel well but the bumper is at my knee yeah that sucks, mine is about 4-5in from hitting rubbing my tires on my fenders. I actually hit all of them at the same time going alittle too fast in a small dip, so now theres a small bend on all my fenders
thehoe92 Posted February 4, 2010 Author Report Posted February 4, 2010 lots of places won't even mention offset anymore they will just say like 24x10 which is what mine is maybe it will just be an excuse for me to upgrade to 26's with better offset Wouldnt be thehoe92 without teh purple
deaf_wish Posted February 4, 2010 Report Posted February 4, 2010 look good i like it My build. http://www.stevemeadedesigns.com/board/topic/74265-project-clean-update-on-doors/ My other build. http://www.stevemeadedesigns.com/board/topic/100534-two-c3s-and-a-mojo2500-under-the-seat/
mr.p Posted February 4, 2010 Report Posted February 4, 2010 looks the same... EDIT: oh snap i see it now you lowered the REAR DCAUDIO BALLS DEEP
thehoe92 Posted February 4, 2010 Author Report Posted February 4, 2010 pictures really do it no justice until I get it dropped about an inch above the tire then it will really show got the stock keys all the way down and the ride is not to bad at all even speed bumps are normal maybe a little better.. not so bouncy its a little stiffer which is nice hoping to get the belltech torsion keys in this week along with the front drop shocks then I just need to buy some rear ones so the back can settle drop shocks plus shock extenders... can you say 7" drop in the back?! Wouldnt be thehoe92 without teh purple
98crewcab Posted February 4, 2010 Report Posted February 4, 2010 if its just "close" to your tire, you should be able to "roll" your fender enough to clear it....when I lowered mine, truck, not hoe, I just put it in neutral and rolled it forward slowly while letting a baseball bat roll between the fender and tire. gave me a smooth strech to give just enough. no I dont hit the fender... 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.