etaks_crew Posted July 23, 2009 Report Posted July 23, 2009 Did I get Ur attention? Lol. My buddy wants me to try and find some box designs for him. He doesn't have a tape measure so Im just trying to figure the dimensions out for him. Dose anyone know or can they get them for me. What I need is floor to back seat( between the headrests ), Wheel well to wheel well and back of the top of the seat to about 2 or 3 inhcs past the wheel well( Like front to back ). Or if you have a box made what are the dimensions and whats in it. I looking for ported 3 to 3.5 cubic feet. Quote
Bryan Posted July 23, 2009 Report Posted July 23, 2009 i cant tell you all of them cause i dont know the year! but i do know that mine is a 99 and wheel well width is about 36 front to back is in the 30's as well Quote MMM BASS OATS..ITS WHAT I HAVE FOR BREAKFAST 2 AudioQue HDC3 18'' subs Rockford Fosgate T1 6.5 mids MMATS 2000.05 XS Power D1200 Knukonceptz 1/0 Pioneer Premier DEH-P490iB " Shit I can roll a blunt better than those bitches in Havana!"- Uncle Elroy
CarAudioFab Posted July 24, 2009 Report Posted July 24, 2009 Really tell your friend to go buy a damn tape measure Quote -Mark Host of "CarAudioFabrication" - YouTube Car Audio Tutorial Channel Check out my forum section here on SMD for my builds and tutorial videos! Subscribe on YouTube: http://www.youtube.com/CarAudioFabrication
EricM9104 Posted July 24, 2009 Report Posted July 24, 2009 Really tell your friend to go buy a damn tape measure x2 :01nocomment8so: Quote 2015 Honda Civic LX 4dr | 110k miles | Stock 1996 GMC Yukon SLT 4dr 4wd | 260k miles | JVC Head-unit
loburbon Posted July 24, 2009 Report Posted July 24, 2009 i have a 2000 2dr and my box is 38w 16h 26.75d. and it comes out to 6cuft after sub and port Quote 2000 gmc yukon 4 sundown Zv3 15's 4 dd m2a's kenwood kdc-x994 2 batcap 4000's 1 batcap 2000 dual alts. 154@37hz and climbing http://www.cardomain.com/ride/3231683 http://www.myspace.com/torque150
wL<3bass Posted July 24, 2009 Report Posted July 24, 2009 (edited) TIP: 2 door and 4door and the years make the spaces differ slightly. I drive a 97 4Door. Between the wheel wells is 38" so can squeeze 39" but I couldn't also front to back in in the mid 30" range depending upon how far you want you port from the tailgate... and behind the backseat I could squeeze 14.75" under the windowline and my current box is I believe 18" Edited July 26, 2009 by wL<3bass Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
korey_hofer Posted July 24, 2009 Report Posted July 24, 2009 yep mine is 39x35x20 and still see that is very close to the gate though like 1.5"-2" Quote previously known as wenn_du_weinst aka fucking internet coward supreme. I talk shit on other forums like a little bitch and hope i don't get caught out on the street.
etaks_crew Posted July 26, 2009 Author Report Posted July 26, 2009 (edited) 96 4 Door And he has a tape but its at his shop which is a 45 min drive and we dont head out that way much lol Edited July 26, 2009 by etaks_crew Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.