MRA08 Posted August 25, 2009 Report Share Posted August 25, 2009 thats a nice cover there but how are you going to run the wires from the top to the bottom. it looks like you completely sealed the hole...i'm sure mr. meade planned this all out before hand. Quote Pioneer Premier 880PRS MMATS MP-5 Digital Designs 9515g Digital Designs M3 Rockford Fosgate T600-4 Infinity Kappa Perfect 6.1's Infinity Kappa Perfect 5.1's Optima Yellow Top D34/78 XS Power D3100 Link to comment Share on other sites More sharing options...
thehoe92 Posted August 25, 2009 Report Share Posted August 25, 2009 (edited) i'm sure mr. meade planned this all out before hand. he buys a lot of napkins to scratch it out on you going to leak the other plans about how to fit the other 5 batteries in your hoe? you thinking about doing another battery tray in the engine compartment on the left side? EDIT: I'm retarded Edited August 25, 2009 by thehoe92 Quote Wouldnt be thehoe92 without teh purple Link to comment Share on other sites More sharing options...
Kasey Posted August 25, 2009 Report Share Posted August 25, 2009 Iirc 4 along the back of the box 5 in the tray and 1 under hood Quote "Audio is not a hobby it's a lifestyle" _____________________________Refs_1_Refs_2_____________________________ Link to comment Share on other sites More sharing options...
thehoe92 Posted August 25, 2009 Report Share Posted August 25, 2009 Iirc 4 along the back of the box 5 in the tray and 1 under hood so a similar box design?it makes sense that he made the lid indented because I can see him putting an amp in there Quote Wouldnt be thehoe92 without teh purple Link to comment Share on other sites More sharing options...
trainman0978 Posted August 25, 2009 Report Share Posted August 25, 2009 (edited) I dont think its deep enough for that.... I think it has a recess to account for the floor being ribbed.... Edited August 25, 2009 by trainman0978 Quote 2007 Toyota FJ Cruiser Voo Doo Blue my upgrades and "build" thread. My Kulicki Box Build -Alpine 9887 head unit, KTX-100EQ imprint-( sound quality for dummies! ). - MB Quartz 3.5" in back pillars -Sundown Audio SAX100.4 - JL Audio 3 way 6.5" component set XR653-CSi ( doors and dash ) -JL Audio 2 way Component set XR650CSi - Alpine MRD - M1005 - Alpine Type - R 12" subs -- 2 - 12" s in a Pete kulicki designed box. -Alpine High speed Ipod cable, and KCA-SC100 with Sirius sat. radio -All wiring is Stinger 12 gauge and HPM Level 3 RCAs, KnuKonceptz Kolossus Power and ground and Big done in 1/0, -270 sq. ft. of Damplifier Pro, 36 sq. ft. of Overkill Pro, 6 full sheets of Luxury Liner, and a gallon of spectrum- -2 Powermaster D680 Powercells in back FINALLY !!! I GOT IT METERED ON THE TERMLAB !!! I did a 140.2 at 42 hertz. Shoehorn, BFH, forklift,duct tape and some zip ties Link to comment Share on other sites More sharing options...
USLESS Posted August 25, 2009 Report Share Posted August 25, 2009 (edited) i think the recess is more to lock it in place and help to create a seal so it dose move and mr meade have to pull every thing out again Edited August 25, 2009 by USLESS Quote my 94 ranger build http://www.stevemead...4-ranger-build/ Link to comment Share on other sites More sharing options...
98HOEONSIXEZ Posted August 25, 2009 Report Share Posted August 25, 2009 LOL Steve-"im sure it will make all you guys happy that were giving me that GREAT ADVICE" Quote Link to comment Share on other sites More sharing options...
mrrairai Posted August 25, 2009 Report Share Posted August 25, 2009 Man you make this car audio stuff look so damn easy. Quote Member since 25 Jun 2006 2011 Yukon DenaliCustomLightz 4300K HID RetrofitEsky TailsEsky Third BrakeEsky 22sEsky Appliques Link to comment Share on other sites More sharing options...
jizazz12 Posted August 25, 2009 Report Share Posted August 25, 2009 as usual tight work man, those batts look like they like there new home keep up the good work Steve. Quote 2007 Chevy Impala LS 1 Crescendo 3KWP 1Crescendo C1000/4 2 DC lvl 4 15's with lvl5 dual .7 coils 1Audio Control Matrix 1 Pioneer P880PRS 1 300 amp Iraggi alt All power runs done with Knu flex 0/1 guage 1 optima yellow top under the hood 1 XS 5100 and two Deka's in the trunk 4 Crescendo MP-8 mid bass drivers 2 DB Drive p5 5 D Pro Audio tweeters Link to comment Share on other sites More sharing options...
8v fury Posted August 25, 2009 Report Share Posted August 25, 2009 I was wondering with the lid on, how much space is from the lid to the top of the batteries? Is there going to be clearance? Quote Pushing it to the limits. Want more power. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.