keepinitloud Posted March 1, 2011 Author Report Posted March 1, 2011 dope.. thankyou 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1
keepinitloud Posted March 1, 2011 Author Report Posted March 1, 2011 awesome clean build dude thankyou 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1
keepinitloud Posted March 8, 2011 Author Report Posted March 8, 2011 a video of the new mids and highs 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1
TheycallmeJT Posted April 11, 2011 Report Posted April 11, 2011 how do you have your mids and highs wired up? and do you have any pics installin the tweets in the dash? ive got a charger and been wantin to do this..any help is appreciated..build looks and sounds great
samslowp1s Posted May 11, 2011 Report Posted May 11, 2011 That is one great looking system you have there. I likey a lot LOL.
C-Fizzy Posted May 11, 2011 Report Posted May 11, 2011 Damn dude, those things sound great, even on camera! under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
uhoh_45 Posted June 25, 2011 Report Posted June 25, 2011 can you post some pics where you ran your power wire looking to get some ideas when i do buddys 300 and i like your the box / what are your specs/ height width? R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log
keepinitloud Posted June 25, 2011 Author Report Posted June 25, 2011 thanks for the comments guys the tweeters are in the stock locations in the dash used metal strap for bolting down your radio to mount the tweeters just bend them down to lower the tweeter to fit under the grill eventually going to make an enclosure to seal them off in there the 8's in the doors were tricky had to make a mdf spacer and off set it a little bit to clear the window I'd suggest 6" dont have to fiddle with it the mids and highs are being ran off a punch 200.2 for now wires are ran through the door grommets 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1
Recommended Posts
Archived
This topic is now archived and is closed to further replies.