newls1 Posted October 30, 2009 Report Share Posted October 30, 2009 Let me first start and say that I always had a "SLight hum" from my older grounds, and now that I was installing my upgraded alts, I thought now was a great time to install the BEST grounds I could do. I made my 2 grounds right to the frame of the truck, and on the same side (Drivers side) of the frame as my front ground. I now have to most annoying squeal in my speakers from this new grounds install, what can I do? I mean, there isn't a better ground then the frame, so what am I missing? The sound gets louder, the faster I go (or should I say, as the rpm's go up, so does the sound) Any assistance would be great, and appreciated.... Thank you Quote I love my staffie So anti FACEBOOK it isn't even funny Link to comment Share on other sites More sharing options...
OrionStang Posted October 30, 2009 Report Share Posted October 30, 2009 Try the old ground spot. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
pmpnu2 Posted October 30, 2009 Report Share Posted October 30, 2009 (edited) i have the same problem. altho for some reason after i took my box out to carpet it and then put it back in in the noise isnt as bad as it was. there is a thread here somewhere on this subject, ill see if i can dig it up for you and give you a linky... EDIT: http://www.stevemeadedesigns.com/board/ind...showtopic=51975 Edited October 30, 2009 by pmpnu2 Quote 2001 chevy blazer xtreme my blazer xtreme build On top of all that, my little sister is marrying a real fuckin winner tomorrow I've gotten that much wood just viewing this thread. Link to comment Share on other sites More sharing options...
AI James Posted October 30, 2009 Report Share Posted October 30, 2009 what deck are you running Quote Link to comment Share on other sites More sharing options...
Shyne151 Posted October 30, 2009 Report Share Posted October 30, 2009 what deck are you running x2, pioneers have a horrid ground loop... Easy fix though. Quote -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000 Link to comment Share on other sites More sharing options...
lanman31337 Posted October 30, 2009 Report Share Posted October 30, 2009 My thread that was linked will cover just about everything you'll need. On a very very rare occassion you'll need an isolator. Try everything that I have mentioned in there first. Quote 2 - Audiopipe AP30001Ds 1 - Lanzar Opti Scion 600.4 4 - Lanzar Optidrive 1232D's 1 - Lanzar Opti 5.1 1 - Lanzar Opti 6.1 1 - Lanzar Opti 6C midbass 1 - Alphasonic PCT6551 1 - Lanzar VX830 1 - JBL 22 band EQ 1 - Lanzar SDBT75NU 1 - AudioControl Epic160 Link to comment Share on other sites More sharing options...
newls1 Posted October 30, 2009 Author Report Share Posted October 30, 2009 what deck are you running its a 4 year old panasonic. Dont recall the model number, but it was TOP of the line back then... paid somewhere between 4-500 for it. Quote I love my staffie So anti FACEBOOK it isn't even funny Link to comment Share on other sites More sharing options...
newls1 Posted October 30, 2009 Author Report Share Posted October 30, 2009 i have the same problem. altho for some reason after i took my box out to carpet it and then put it back in in the noise isnt as bad as it was. there is a thread here somewhere on this subject, ill see if i can dig it up for you and give you a linky...EDIT: http://www.stevemeadedesigns.com/board/ind...showtopic=51975 thanks, reading it now Quote I love my staffie So anti FACEBOOK it isn't even funny Link to comment Share on other sites More sharing options...
OrionStang Posted October 30, 2009 Report Share Posted October 30, 2009 Excuse to buy a new H/U?? Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
newls1 Posted October 30, 2009 Author Report Share Posted October 30, 2009 Excuse to buy a new H/U?? absolutely. I hate this deck with a passion. For some reason, about 2 years ago, it stopped holding its memory on certain things.... I.E= built in crossover points. Very annoying! (please dont say check your constant 12v wire LOL) The deck CAN NOT play CD's to save its life, etc.... I really do need a new deck, but funds arent there to afford one right now... Quote I love my staffie So anti FACEBOOK it isn't even funny Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.