roscoe1129 Posted June 9, 2007 Author Report Posted June 9, 2007 Man your progress on this is awsome. GREAT lookin stuff, but I have one Q/concern: Bein that the whole enclosure/wall front is swiss cheesed, and them subs have got to weaigh an assload, I would be concerned the swiss cheese mdf is not enough to hold em...? Maybe some 3/4"all thread in every direction to sie it all together? Even crossbracing the port w/ all thread you'd only lose that 3/4" of port area so it shouldn't make an impact I'd think. That an/or just glass the hell outta EVERYTHING. Other than that looks awsome. REeminds me of PIPOS setup w/ the 5 subs. yeah they weigh 75 lbs each! my ass end is starting to sag where it started off raked! the "ports" are actually connected to the sides and top/bottom of the enclosure and I did glass the hell out of em! Plus being 13" s thick helps! I have actually never seen inside pipos enclosure...sad to say..... thanx guys. today I just glassed more and hooked up all the power/ground and fuse terminals unbelievable it took so long....oh yeah went to the city and got some vinyl. will post pics L8r Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
David Posted June 9, 2007 Report Posted June 9, 2007 thats badass bro I like the design alot, cant waitto see vids from this monster. IMO that looks nothing like pipo's set-up
roscoe1129 Posted June 9, 2007 Author Report Posted June 9, 2007 will have at the least the wall running in the am, then off to my morels which will go in the stock locations in the front door for now untill after the show, the ovations they sent me were the reg ones onot the xo's with the x-over so I will have to wait on them, so I will work on those, my x over and 360.2 and the beauty board. Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
AP Zoutes Posted June 9, 2007 Report Posted June 9, 2007 WOW!! I just got into town tonight and caught up on this.......very nice and creative.....Excited to know how this turns out
Dozier Posted June 9, 2007 Report Posted June 9, 2007 I am hanging on the edge of my seat..waiting for the end to come. www.AlabamaDrift.com04 Silverado in the works
Tremor1127 Posted June 9, 2007 Report Posted June 9, 2007 your doing all of that with just a jigsaw? super mad props if so...
roscoe1129 Posted June 11, 2007 Author Report Posted June 11, 2007 your doing all of that with just a jigsaw? super mad props if so... ha ha no those were jst rough cuts used a flush trim bit on the router table for the rest...updates anyone???? Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
Eric B Posted June 11, 2007 Report Posted June 11, 2007 Update us Roscoe.. PLEASE!!!!!!!!!!!! 2007 Chevy HHR LT UNDER CONSTRUCTION 1st Place Loud N Low 2010 MWSPL Finals 3rd Place Xtreme 3 2010 MWSPL Finals
Recommended Posts
Archived
This topic is now archived and is closed to further replies.