stephenes89 Posted January 14, 2010 Report Share Posted January 14, 2010 (edited) ok im fed up with troubleshooting...im running two amps off of my distribution block, the amp for my comp's works fine no problem with it, but my amp for my subwoofers isn't giving me a lick of output. brand new amp.. any input on what the hell may be going on would be fantastic.. Thanks, Hifonics Brutus Bxi2010D sold grounds power going in but not out Edited January 14, 2010 by stephenes89 Quote BIG STICK 2005 Chevy Malibu 3.5L v6 (Impound Status) (New) Hifonics Brutus BXI 2010D - Courtesy of Maxxonics (2) Kenwood KAC-8402 Amps for mids & Highs (ok for now..) Pioneer DEH-P2900MP Head Unit (4) 6.5" Soundstream Tarantula's (2) 5.2" Soundstream Tarantula's (6) 1" Tweeters (2) Fi BL 15" BX15 Soundstream Bass Booster 0g Streetwire Link to comment Share on other sites More sharing options...
Red-navi-916 Posted January 14, 2010 Report Share Posted January 14, 2010 after u installed the amp did u put the fuse back in between the batts and the amp lmao..... but how is your subwoofer wired? Quote BUILDLOG http://www.stevemeadedesigns.com/board/ind...showtopic=61862 "98crewcab"Never a POS....just always "a work in progress" lol that's how we roll bitches!!! Your a lowlife kid. I bet your mother wants to kill herself for not swallowing your ass. Link to comment Share on other sites More sharing options...
andym85 Posted January 14, 2010 Report Share Posted January 14, 2010 is the amp on? remote wire? Quote i likes me some audio stuff... Link to comment Share on other sites More sharing options...
stephenes89 Posted January 14, 2010 Author Report Share Posted January 14, 2010 fuse is in ( Comp Amp is working )..and so is the remote wire.. i have two 12" QVC's wired at 2-ohm Quote BIG STICK 2005 Chevy Malibu 3.5L v6 (Impound Status) (New) Hifonics Brutus BXI 2010D - Courtesy of Maxxonics (2) Kenwood KAC-8402 Amps for mids & Highs (ok for now..) Pioneer DEH-P2900MP Head Unit (4) 6.5" Soundstream Tarantula's (2) 5.2" Soundstream Tarantula's (6) 1" Tweeters (2) Fi BL 15" BX15 Soundstream Bass Booster 0g Streetwire Link to comment Share on other sites More sharing options...
mikey634 Posted January 14, 2010 Report Share Posted January 14, 2010 Does the sub amp light up when the head unit turns on? If it does it eliminates power/ground problems... Otherwise are they both hooked up to the same power/ground source? Like 12v is coming from the same distributor block, and ground is going to a similar spot on the frame? Have you checked if all the wires are in there tight? Have you checked the remote wire going to the sub amp? If the amp IS turning on, is it going into protect? Is your gain and/or bass boost turned up too high? What kind of amp do you have? Have you taken a volt meter to your amp outputs (maybe its your subs?) So many questions and possible solutions, throw a bone over here will ya? Quote Link to comment Share on other sites More sharing options...
Team Nemesis-DJ Posted January 14, 2010 Report Share Posted January 14, 2010 Need more info ...to help you Quote Link to comment Share on other sites More sharing options...
andym85 Posted January 14, 2010 Report Share Posted January 14, 2010 i know it sounds dumb, but is ur sub output turned on on the headunit ive done it before..thought my shit was messed up...had the sub turned off on the head unit...lol Quote i likes me some audio stuff... Link to comment Share on other sites More sharing options...
treossi Posted January 14, 2010 Report Share Posted January 14, 2010 is the amp in protect mode? which light is on ? more info would be cool Quote Team sundownWESTCOASTSPL.COM we're throwing dbdrag events very soon visit the website for details Link to comment Share on other sites More sharing options...
Red-navi-916 Posted January 14, 2010 Report Share Posted January 14, 2010 x2 with andy i have a feeling that's it too Quote BUILDLOG http://www.stevemeadedesigns.com/board/ind...showtopic=61862 "98crewcab"Never a POS....just always "a work in progress" lol that's how we roll bitches!!! Your a lowlife kid. I bet your mother wants to kill herself for not swallowing your ass. Link to comment Share on other sites More sharing options...
stephenes89 Posted January 14, 2010 Author Report Share Posted January 14, 2010 Wire Diagram for QVC's < theres the diagram im using now (the first one) the amp is turning on and the power light is on, on the amp. it is an Hifonics Brutus BXI 2010, everything was turned down when i installed it, when i started to set the gain. i would get to about half way up and the system would start to basically shut off..not the amp my Comp speakers would start to like..crack kind of.. but i never heard anything from the subwoofers (soundstream SPLX 124) Before I sent my HiFi BXI 2008D back to the manufacture i was having the same problem..was actually the reason i sent it back and they swapped it out ad gave me the 2010D and im still having this problem. Quote BIG STICK 2005 Chevy Malibu 3.5L v6 (Impound Status) (New) Hifonics Brutus BXI 2010D - Courtesy of Maxxonics (2) Kenwood KAC-8402 Amps for mids & Highs (ok for now..) Pioneer DEH-P2900MP Head Unit (4) 6.5" Soundstream Tarantula's (2) 5.2" Soundstream Tarantula's (6) 1" Tweeters (2) Fi BL 15" BX15 Soundstream Bass Booster 0g Streetwire Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.