Aleks Posted February 10, 2010 Report Share Posted February 10, 2010 I just put two 10 inch kicker cvr's in a 2004 Dodge Ram. They dont really sound that hard though. I have a 1600 watt DHD amp. Is it the amp or the box? The box takes up all underneath the seat. What can I do so they can bump hard? Link to comment Share on other sites More sharing options...
Thenumber1z Posted February 10, 2010 Report Share Posted February 10, 2010 Depending on what ohm your subs are, Go with a kicker 750.1 or maybe try a Hifonics BXI 610, you may even look at a rockford fosgate THIS I don't know what your buget is but those are just two cheaper options. Just remember most low end companies over rate there products. 1991 Nissan 300zx JVC KD-HDR50 (2)Kicker L7 10's Custom enclosure(Entire hatch) Hifonics 1606D (Subs) Kicker 650.4 (Mids & Highs) Hifonics ZXi 5.2C (Front) Kicker 07DS600 (Rear) Link to comment Share on other sites More sharing options...
wL<3bass Posted February 10, 2010 Report Share Posted February 10, 2010 Depending on what ohm your subs are, Go with a kicker 750.1 or maybe try a Hifonics BXI 610, you may even look at a rockford fosgate THISI don't know what your buget is but those are just two cheaper options. Just remember most low end companies over rate there products. Finally a newer member that has a clue! +1 to you sir! Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
treossi Posted February 10, 2010 Report Share Posted February 10, 2010 sundown 1500 Team sundownWESTCOASTSPL.COM we're throwing dbdrag events very soon visit the website for details Link to comment Share on other sites More sharing options...
Baydestrian Posted February 10, 2010 Report Share Posted February 10, 2010 Yep depends on the ohm of the subs...these subs want 400rms each so I don't think that RF amp would be a good choice...the 750.1 if you can afford it since Kicker amps almost always underrated IIRC 2015 Mazda 6 JVF Customz 4.0 Proto 15>Wolfram W4500 @ .5ohm 2 Sundown Neo 6.5 + 2 CT Meso Tweeters (Front) x Kicker KS6.5 (Rear)>JL Audio VX400/4i NSB-AMG35 (front) / 40ah Lithium Headway (Rear) built by Erni Audio & Electrical Link to comment Share on other sites More sharing options...
TeejayBee Posted February 10, 2010 Report Share Posted February 10, 2010 Id go with a zx750.1 but its like they have beensaying its what you have them wired to for kicker amps it cant be lower then 2 ohms. well not lower then 1.5 ohms to be honest i run my zx1000.1's at 1.8 everyday and they are perfect Link to comment Share on other sites More sharing options...
Polecat Posted February 10, 2010 Report Share Posted February 10, 2010 first real question: what impedance are the subs..? Behind every great man....is an underwear tag! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.