EdgarCervantes Posted February 22, 2010 Report Posted February 22, 2010 Hey guys im trying to learn how to fiberglass, i have watched a couple videos on youtube now and read some stuff but, i would like to know what supplies are needed like i know there's fiberglass resin, and mat and bondo butttttttttt what else goes into it? like the hardener whats it called and stuff like that any tips? oh and im also going to buy everything at home depot or autozone Thanks in advance
ben29555 Posted February 22, 2010 Report Posted February 22, 2010 (edited) most of the time when you buy the stuff the hardener for the fiberglass will be with it. if not its in a clear tube and will be located right by the fiberglass these are helpful to knock down the rough bondo http://shop.advanceautoparts.com/webapp/wc...i_sku=7100320-P and you will need a good amount of sand paper Edited February 22, 2010 by ben29555 My Build Log loud bass songs
J00bles Posted February 22, 2010 Report Posted February 22, 2010 Hey guys im trying to learn how to fiberglass, i have watched a couple videos on youtube now and read some stuff but, i would like to know what supplies are needed like i know there's fiberglass resin, and mat and bondo butttttttttt what else goes into it? like the hardener whats it called and stuff like that any tips? oh and im also going to buy everything at home depot or autozone Thanks in advance both places will have what you need. fiberglass (mat or cloth), resin, catalyst (hardener), paint brushes, disposable containers, body filler (NOT BONDO!!!), sand paper those are the things you'll need off the top of my head. 8 DC Level 4 M2 15s2 DC Audio 5ks26^2 clamshell tuned to 30hz9 Kinetik 1400sMechman externally reg'd 340 S seriesin a 99 Jeep Cherokee Click to see J00bles' Youtube Channel
jmitch Posted February 22, 2010 Report Posted February 22, 2010 dont forget gloves and old clothes I know a lil about everything so dont call me Mr. Know it All.
n8ball2013 Posted February 22, 2010 Report Posted February 22, 2010 and patience. THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
EdgarCervantes Posted February 22, 2010 Author Report Posted February 22, 2010 okay so far this is my list: mat or cloth, resin, catayst, brushes, disposable container, body filler, sand paper, gloves, stuff like that but isnt there one more thing for the body filler? iv seen some people apply a hardener for that too or something like that
enemyofsilence Posted February 22, 2010 Report Posted February 22, 2010 read up on here http://www.fiberglassforums.com/ good info and a good forum to learn on. Team Bass-Hz
EdgarCervantes Posted February 22, 2010 Author Report Posted February 22, 2010 read up on here http://www.fiberglassforums.com/good info and a good forum to learn on. Thanks! ill check it out
flashlight_65 Posted February 22, 2010 Report Posted February 22, 2010 drop cloth, cheap brushes (not the foam ones), a few mixing cups so when the resin sets on your piece you can continue to mix more in a clean cup, a smaller container to measure out the mekp and a lot of sand paper My builds: my caddy my 'hoe friends impala
Gotloud555 Posted March 15, 2010 Report Posted March 15, 2010 Don't forget baby powder.. ONce that start putting kitty in your box, it will make your skin itch all day long...
Recommended Posts