uhoh_45 Posted September 21, 2010 Report Posted September 21, 2010 crowbar if they have a crowbar they'll just pry them out Quote R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log
Reaper Posted September 21, 2010 Report Posted September 21, 2010 thats why i use t-bolts not many crooks with allen keys on them, and prying those with a crowbar would be hard as hell. this time around if i can make my port big enough im going to put nuts on the end of my t-bolts. try to unthread that without a wrench. Quote
bassl0va Posted September 21, 2010 Report Posted September 21, 2010 thats why i use t-bolts not many crooks with allen keys on them, and prying those with a crowbar would be hard as hell. this time around if i can make my port big enough im going to put nuts on the end of my t-bolts. try to unthread that without a wrench. If they can't take it off, you'll find a crowbar sticking out of your amp. Quote My RE MT 18" wall build Former build, farewell beloved wall.In progress, Toyota Starlet build This forum has a massive boner for ridiculous electrical upgrades.
Andrew2944r Posted September 21, 2010 Report Posted September 21, 2010 Sounds like a good idea, but I agree if a thief cannot get it, they will just break it. Quote Team Ampere Audio
Skullz Posted September 21, 2010 Report Posted September 21, 2010 Dunno about that one as there are screws with many types of special bits that would be just as tough to remove if you don't have the proper bit to remove it, plus in the event you want to remove your subs now you have to deal with trying to get them out yourself and possibly messing them up with a drill bit through the surround. Quote 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2
michigancapri92 Posted September 21, 2010 Report Posted September 21, 2010 (edited) the grab it only works in a reversed motion ... so if you did go with that idea every time you took them out you would have to put new screws in and strip them. i would just get some of those security screws you see on bathroom stalls .... star bit with a nipple in the center so you have to get a special bit and no other bit will work and the niple in the center prevents form using a staight head on the star ... thats what i use on my stuff these screws http://www.google.com/products?hl=en&q=security+screws&um=1&ie=UTF-8&ei=k8CYTPOlOZClnQfM4qAk&sa=X&oi=product_result_group&ct=image&resnum=3&ved=0CFIQzAMwAg or any type of secrity screw they make some funny bits out there Edited September 21, 2010 by michigancapri92 Quote Teamcapri.comThe TeamCapri 1992 Mercury Capri XR22012 FORD EDGE SQ BUILDOld build logMy FeedBack1992 Mercury capri XR2 Hyper LED
iKidwell Posted September 21, 2010 Report Posted September 21, 2010 is this even a question? if it works on other screws why wouldnt it work on this haha Quote c'mon now, if i was shooting an 8 year old, it wouldnt be MY 8 year old. i recently got a Pyle PL1590BL and i was building an enclosure for it tuned to 25 hz. i didn't have any tools to cut a circle so i hit it with a big hammer. 2003 Infiniti G35 Sport Sedan Build in Progress
Toady Posted September 21, 2010 Report Posted September 21, 2010 (edited) What if a crook had a graBit ......... Just Sayin. You know its a good idea but its pointless in today's technologies. Think about this, A guy gets tired of his trunk getting broke into so he welds it shut. Some hardcore crook actually has a Cutting torch mounted to his truck. Then cuts the trunk open to get it. People dont realize it but that could actually happen. Edited September 21, 2010 by Toady Quote
michigancapri92 Posted September 21, 2010 Report Posted September 21, 2010 i look at it this way .... i have a convertable with nice sound system ... my doors are always unlocked .... why ?? if someone wants it they are going to get it .... you have to open my door to get the stuff out its a small two door ... ill let them open the door and take the stuff ... better them take it and me replace it then they take it and i replace the speakers AND a soft top .... no matter what you do if someone wants your stuff ..... they will take it plane and simple ... Quote Teamcapri.comThe TeamCapri 1992 Mercury Capri XR22012 FORD EDGE SQ BUILDOld build logMy FeedBack1992 Mercury capri XR2 Hyper LED
bassl0va Posted September 21, 2010 Report Posted September 21, 2010 There is no point in all this safety stuff, as toady said, ifyou weld your trunk shut, they will just cut it open. Same goes for most security stuff. Just lock your car in a garage and install and alarm in your car. Quote My RE MT 18" wall build Former build, farewell beloved wall.In progress, Toyota Starlet build This forum has a massive boner for ridiculous electrical upgrades.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.