CJ18 Posted October 20, 2010 Author Report Share Posted October 20, 2010 Why wouldn't you just run the pos and neg for the amps off of the buss bars instead of the two other ones? Seems like you would get a slightly better power flow by connecting to the buss bars. Either way, nice build! How'd you do the kinda countersunk looking holes for screwing everything together? its looks like an angle countersink or something. Looks really good though! And thanks for starting a new build log...that other one just got wayyy too outta hand! Just gonna run off the front 2 to keep everything balanced. It will also give me slightly shorter power and ground wires. With both batteries getting 2 1/0 power and ground connections to the bussbars i shouldnt have any voltage difference. i would have done all 8 in a row but the aluminum bars I ordered were only long enough for 6, which was my original plan, so i had to modify and put the last 2 in front. The pocket holes you see were done with a kreg jig pocket hole kit I ot from lowes. It is usually used for building cabinets but it works great for this too. Link to comment Share on other sites More sharing options...
CJ18 Posted October 20, 2010 Author Report Share Posted October 20, 2010 10/20/2010 Still working but waiting for some stuff to dry so here are a few pics of the progress. Picked up some cans of spray on bedliner to coat the amp/batt rack in. It will get 2 coats of this then a final resin coat to water proof and seal it. Rack progress Front face of the rack is coated and will have 3/16" plexi in the opening More to come later Link to comment Share on other sites More sharing options...
hdorre Posted October 20, 2010 Report Share Posted October 20, 2010 Should be really clean! On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread Link to comment Share on other sites More sharing options...
Socky Posted October 20, 2010 Report Share Posted October 20, 2010 Looks nice, can wait to see that great voltage Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
El1T3Bass Posted October 20, 2010 Report Share Posted October 20, 2010 cant wait this should be really nice and really loud wow now this just shows that smd isnt just any forum. We are a brother hood. here let me put it in retard-onix for u aareehhhh duuuurrrrr ehhh got it now? Sweet baby jesus the amount of quoting the quote above the quote in a quote is epic Link to comment Share on other sites More sharing options...
Nova Posted October 20, 2010 Report Share Posted October 20, 2010 Looks great man. Mind telling what you paid for the bus bars? stop making sense you'll kill the argument. Earth, you feel me? You aren't loud enough to be felt. Link to comment Share on other sites More sharing options...
bobonit Posted October 20, 2010 Report Share Posted October 20, 2010 Looking good man! 97 Maxima SE Bunch of shit going in, check out the build Build Log Link to comment Share on other sites More sharing options...
CJ18 Posted October 20, 2010 Author Report Share Posted October 20, 2010 Looks nice, can wait to see that great voltage Thanks...me 2 my goal is to stay above 14 on 5k and above 13.4 on 10k cant wait this should be really nice and really loud Hopefully playing tomorrow night if not then it will be ready on Sunday....gotta go play in a charity golf tourny....love it free hotel beer and food on the course Looks great man. Mind telling what you paid for the bus bars? Thanks...I think I paid like $60 for the aluminum and I drilled and tapped all of the holes myself. They are made from 1/2x2 aluminum from www.metalsdepot.com Looking good man! Thanks man....more pics uploading now Link to comment Share on other sites More sharing options...
sayhuh? Posted October 20, 2010 Report Share Posted October 20, 2010 FRikken awesome man. Love your wood work. Do go do more work. Blown Link to comment Share on other sites More sharing options...
CJ18 Posted October 20, 2010 Author Report Share Posted October 20, 2010 10/20/2010 continued Front faceplate with plexi window Put the plexi top on for a test fit....brace added in next pic Ready for bedliner 4 cans of bed liner later....letting it sit and dry while I post this and eat dinner then gonna go back and resin coat everything, let it sit and cure overnight and will be ready for the batteries tomorrow. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.