kickass audio Posted February 5, 2011 Report Share Posted February 5, 2011 damn, i wanted to be the first to post a pic of the 175.4 guts. lol. oh well. so hey what size power and grounds are on the 175.4? Are they 4 gauge max? Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Ford302Redneck Posted February 5, 2011 Report Share Posted February 5, 2011 I'm still curious on what class the 175.4 is? Quote Link to comment Share on other sites More sharing options...
kickass audio Posted February 5, 2011 Report Share Posted February 5, 2011 i think i was told thats a class a/b. idk for sure. to be honest i bought the amp from corona_jeff on here without knowing a damn thing about it. all i knew was that it puts out a rated 175 watts at 4 ohms per channel. i didnt know about the knobs and settings on it, the guts of it, the wire size it can accept or anything like that. i just trusted that it would be awesome because of how great dc's subs and old amps were. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
00sdime00 Posted February 5, 2011 Report Share Posted February 5, 2011 Yes it is A/B if that is what you're asking. And the terminals for power and ground are 4ga. The only thing they are missing is a 10x switch on on the higpass and lowpass filters when using them in bandpass mode. For those of us that are using active processors for our filtering, it's not a big deal....But it does limit those users who are not. Quote A half-wit gave you a piece of his mind, and you held on to it. My Youtube vids...enjoy anythings possible with the right build =] we accept visa and mastercard =] Link to comment Share on other sites More sharing options...
kickass audio Posted February 5, 2011 Report Share Posted February 5, 2011 What do you mean 10x switch? For how many db's the crossover point is at? And another question. Is the hp and lp just a normal gain knob style or does it "click" so you know what freq it is set to? I have a 3sixty.2 as it is but want the best I can get especially since my speakers are only made for 100 watts rms. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
chapo123 Posted February 5, 2011 Report Share Posted February 5, 2011 is that a bass boost knob or gain knob? def feelng the clip light! are these rated at 12v like sundown or 14.4? Quote Steve I don't know why but everytime I see your new paint I want a Dr. Pepper...... is this normal? heres an analogy for you. running a high power stereo without a fuse is like having unprotected sex with that hot chick at the bar with the sketchy sexual history. Sure you may be fine and nothing happens but that one time something does happen you're fucked. i dont want woofer broke like bass sound clip clip and voice coil overheat 2 sa12s, saz1500 build log http://www.stevemeadedesigns.com/board/topic/91183-chapo123s-sundown-build-log/page__gopid__1250604entry1250604 Link to comment Share on other sites More sharing options...
JeremyN Posted February 5, 2011 Report Share Posted February 5, 2011 the 10x switch he is referring to is for the crossover points in order to use them to make a real bandpass and true active speaker setup........ Quote 2 12" Jeff Vue Customs 1 set MB Quart FSB 216 in doors1 American Bass 100.1 on sub1 Hertz EP2 on doorsJVC deck IPOD controlStock 105 amp alt DD-1big 3new build in Chevy caviler http://www.stevemead...chevy-cavalier/last set up in the ZX2 http://www.stevemead...-current-build/old build log http://www.stevemead...-1998-ford-zx2/ Gold is the money of kings, silver is the money of gentlemen, debt is the money of slaves. Just my .02c that shop needs keep those doors open so they have to charge for it if people think 10k is a lot then they should get into other hobbies.. like masturbating, cause any hobby cost money to maintain Lol no, I'm smarter than that bro haha. Fool me once, shame on you, fool me twice..............go fuck yourself lol Link to comment Share on other sites More sharing options...
kickass audio Posted February 5, 2011 Report Share Posted February 5, 2011 ahh ok, i gotcha now. well i dont really need them, i have a 3sixty.2 for all that processing stuff. now i have to figure out a good spot to put them at on the amp so i dont disrupt it. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
CJ18 Posted February 6, 2011 Report Share Posted February 6, 2011 a fucking clipping light!! Im buying one how much is the 2k? Shoot me a PM Ill help you out! Quote Link to comment Share on other sites More sharing options...
kickass audio Posted February 10, 2011 Report Share Posted February 10, 2011 Hey Cody, since you have the 175.4. it shows in the dc website that the amps all have a clip light. now i know what you are gonna say because i have a tpi 440 now to measure clipping but does this have it or is it a lie on the site? im not getting my 175 until tomorrow sometime. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.