KOZ89

probably need a new alternator, i did that with mine and i gained a little with stock alt, or maybe a bad connection somewhere, did you crimp or solder your cables?

if there is room on the passenger side, i'd build a nice wall facing you so once he hits 160 the car will start drifting, but rights only haha jk i'd go for some nice 8's

no crimping for me, just use rossin core solder and good to go

yeh i was very, very disappointed by that decision, but it had to be made, if for some reason i was in the middle of some retard breaking or driving like a dumbass i would probably be looking at me getting knocked out by the box or it just sliding back and forth. I was planning on putting just 2 in the back so its not noticable, but it's impossible with the room i was working with i tried to give my self a little bit of space with the seat since i can't pull it back any more Edit : Build will be done before may 19th 88% sure, and i am looking forward to see anyone who is going to this SPL show in Connecticut, that is located in Rocky Hill near porter and chester inst. link for the event http://www.stevemeadedesigns.com/board/topic/138676-nespl-dreamz-ii-reality-2012/

this is what i accomplished this weekend MECHMAN 270amp XP FLEX pretty thick Brass hex screws 1 1/2" customized threaded down an inch Solid brass construction with 24k hard gold plating amp setup box finally in copper washers on both ends thanks to pstone11 i bought this of off him, the Alpine cda-9886 works like a charm so far

that time of the year where it's getting close to this event. Anyone else going? I should have my setup in by then, hopefully if nothing goes wrong

don't have anything to put this on, except my headphones DENON AH-D2000 take LOW LOW notes, so anybody hit me up with some feedback not sure if posted before but here it is http://www.youtube.com/watch?v=QHVDLGgNggc

wow

this is how i do it As i said, this is how i would do it, but if you want to be more safe with the way you wire your system and want to add more Power, or ground wire you are more welcome to do so. Only drew this out in a couple minutes, if i see something missing i'll fix it

berlin, connecticut

HAHA

oh i'm too high for this, my bad, misread, i feel like an asshole, sorry but i'm not, and to prove i made a mistake i won't edit out my comment and deal with it like a man

would help if you mentioned what model sp4, btl-n series, bl, q series, etc. but i seen some bangers on youtube, and they hit hard

chunky little fellas, hmmmmmmmmmm

warranty is really important, see what you can come up with talk to the people who sold you the car check your warranty and all that good stuff, later on contact whomever sold you the alt and talk to them see what they can help you with.