Leaderboard

Yes sir, I think Metra dropped the Tsunami name all together and is now called T-Spec. I have no idea how the wire is or is not effected if at all. But from the one thing I remember is the old tsunami terminals terminals where made out of a thicker material. Not something you could easily bend with your fingers like some ring terminals out there, and they still seem to be the same way. They also come in 3 different hole sizes depending on your battery stud ( 1/4, 5/16, and 3/8) which is something that is rarely ever done by other companies.

You in skinny jeans.. That's quite the interesting mental image LOL

Not for 4 SA-18s I don't, they are 600 wrms each woofers.

Not much of an update from yesterday or today (so far)... It was raining out so I couldnt do much on the vehicle So I decided to clean my tablesaw up, because its been getting dirty Looking a lot better now Got everything placed out to do a little soldering These are the T-Spec 1/0 terminals, 1/4inch hole which fits the 6mm bolts used on XS Power batteries nicely Soldered up 8 jumpers for the rear 5 XS Power D3100s Got all the batteries hooked up to each other, and removed the 2 hammer crimped jumpers Since there looks to be a lot of colder rainy weather coming (mid to high 40s in the day, 30s at night) I cleaned up my "install bay" to at least be able to back the rear of the hoe in to do work on the power wires and than drive it in a couple feet to do work under the hood. Its not much room, but keeps me out of the rain, wind, and cold since the garage has a tiny 220volt electric heater.

Impressive.

Yea Im not really sure what Metras game plan is, but its not stopping me from using some of their products one bit.

Beat mode accomplished! How do you like that Shop Fox fence?

Front battery Toolmaker terminals from CJ18 A whole lot of 2.5 by .75 inch mdf strips to add more strength to the rear wall. Once these are in place brings the rear wall up to 4inches thick. Still need to put another 3/4 inch sheet over these yet, and at least 2 more layers in the back which should make it 6.25 inches thick, may go for 7inches, gotta be sure to leave room for batteries however.

shoot me a pm, i have some questions for you that pretty much only you can answer

what alternator are you running?