Little more progress..
Welded the little strip on the bottom to give the amp rack a ledge to set the amps on so they dont slide off before they get bolted.
welds are starting to look a tad better, but much more prat ice is needed for sure!
The hinge idea I came up with. Using a grade 8 bolt so it should be plenty strong and welded the nut to the amp rack itself.
Should give me minimal /limited room to get under the amps for whatever reason if needed.
Hung the rack from a JL audio basket with a giant ziptie
And a couple coats of paint
Sold an alt to my friend and needed a harness to get the dummy light to turn off on the dash, Singer was the first to reply and reasonably priced ftw
amps laid out on the rack to mark the holes to drill them for bolts
Also drilled the holes in the angle iron which will be secured to the back of the wall with lag bolts
Hinges bolted on
Also pulled the batteries out the back for the time being