fox_racin4

LOL!! i cant play down to 11hz with the amount of power i have now SSF is off as well, last set up could tho!

Can i use the DD1 to gain match amps?

Tyga Rack city 29hz ftw And bigpimpins let my beat pound

Lil info Electrcal is not up to par, yet Also still tweaking the box so te subs can handle the power a bit more Best score todate was a 154.8@39hz

Mine us 52/62 And sub at 0 I get to 52/62 ten sub volume to -10ish then protects Sometimes i get it a bit higher but then voltage really drops and i back off and keep voltage over 13v Only way it can be from clipping is from clipped music Which is very possible

I rioll into volume for that reason there And rarely burp Its just a daily vehicle and does decent numbers which is a bonus

did you not read my post? voltage is over 13v most of the time... i dont even get to get to full tilt becasue of electrical and subs hitting xmax, bos still needs to be shrank

right at the amps the subs are gettin it.. ill have a vid of some excursion SA10s vs 1500-2k daily ftw

with 2 amps strapped at .8 i rose to 2.2 ohm so i would assume rise would be less, with more amps no? sometimes its fine others not so much i keep voltage around 13v, electrical is good.. but not up to par yet, 900A of alt and 8 batts ( 6 hc2400s and 2 oddesy 2150s)

amps are at .7 strapped... what will casue the amps to protect on a quick kick drum or bass note? not enought time to rise? seems to be fine on "drawn out" bassnotes amps are saz4500s

What kind of exhaust do you have...if any at all Lol

IIRC his subs are inverted My sa10s stunk while being played for about 3 weeks never got warm Eventually stopped smelling them Just put 1 new sub in after i shreaded one And the smell is back I named it "the sundown smell" hahah

Your subs are also new too My sa10s stankkk for a while when i first got them After a while it went away... Even now with the 4 4500s they dont stink!

if you have a comp ride that hits that all day and higher... why the hell are you asking us for box size help/info? seriously. I am at a loss of words for this statement and would like a valid answer. List equipment etc, post some pics.. surely you'd have at least one pic of it on your pc or uploaded somewhere.. what's your competitor name? what organization so I can look into it.. minds want to know. some people can build very impressive burp vehicles... but when it comes to a DAILY ground pounder.. not all can design a box for DAILY ,even if they can build a 155+ burp vehicle

When i do door panels i do 3 layers and it turns out very strong

Just because it wont bottom out under tunning, doesnt mean it cant unload ABOVE tunning a well, How much excursion is there?

Chris wanna try 4 4500s!?

Their is rub marks but it was played a bit after that happend as well so Whats the best way to fix this?. The port doesnt bend, just goes straight If i were to bend it so it was an L would that give the subs something to load off?

finally got a pic!

im sure power was a factor, but even with the 2 amps it would do it now and then so i think the added power finished it off it is the sub coloser to the port but all seem to load OK im going to recone and shrink box by a cube or 2 and re try just dont want to do much to the box as i can play almost anything from 30hz-50hz

IIRC SA10s dont "bottom out" the coil cant hit the back plate, the tripple joint hits the pole piece first i believe, But since it broke at highish vomume it did smash the back plate a tad.. It was makin some noise before adding the 2nd pair of amps so i probly just finished it off?

power... 4 4500s strapped at .7 ( not getting to full tilt becasue of voltage backed off at 12v) SA10s subs see 1-1.25 cubes wall is tuned to 40hz tone was a 39hz tone only good thing, did a 154.8@39hz!

soo.... what would cause a coil to snap in half right above the coil? no pics ATM tho

Im also wondering this!! Bump