fox_racin4

Yup...thats what i ment...

If your fans always on theres one issue, also, just because your not reving high while driving, doesnt mean your getting good mpg

They fit, very tight but they fit Corey0928 shipped his in flat rate boxes

i have ran alottt of them... incomming PM with my number i have some info

dynomax racebullet or pypes violators

Umm... Quite a bit of power Clamped just over 10k from 2 4500s @ .35ea

Www.summitracing.com

any 49.9 guys going?!

So he can say "i built this MYSELF" Sure... if the parts work well together. If the parts dont actually work well together, the sub could fail or sound horrible. Sure, he could still say "I built this MYSELF." However, I wouldnt be too proud of building a POS. Op, if you want to build a custom sub, please do some research. Good luck first one i did i took a WMD2 motor ordered someparts from sundown.. and put it all togeather.. took 7k pretty good and sounded great... cant learn without trying

hows it a vs thread? lol hes asking how well itd work and people are giving opinions on it

They were refering to other guy. Ive never had an issue with type Rs and ive ran 2000rms to one 12 daily before..

So he can say "i built this MYSELF" I have a 15" here i built.. Its a pretty awsome feeling whwn you take a pile of parts add some glue an finish with a fully working sub.. (not a drop in recone) Its also pretty fun to build a sub..

My mechman 425 would make a whole 80a at idle.. Id sit at 12.6 at idle usually Since them ive added a singer 400a alt and a 250a alt And can get about 3/4 volume ( 4 saz4500s @.35ea ) without dropping under 13v And i only have 6 batts

Ill be there, not sure what numbers the truck will be doin as some new equipments on the way

no cannot to that strap them so its 2 pairs of amps, and get a pac-1

12's can hit deep notes big guy i have some 10s and i can destroy 27hz.... and play well into the mid 55hz area..

I also did that in the bed of my truck... Works well to say the least.. Lol My 2 chans would Thermal protect without the fan... They have yet to protect!

The 200.1 will do rated power... Theres ALOT of debates about the 200.1 right now with dbdrag..

how are you tunned to 38? Teach me plz. I wanna know how you tunned to 38!! Settle down jiggle stick, Fox is from Canadia, they spell shit different up there..... My phone froze.. To cold in igloos to use phones eh Tuned* lol If you search my build log te last couple pages have vids.. Or search Lauziere1 on youtube he has alot of vids of the truck.. I can do a 55.1 on music at 46hz And peak at 55.3@39hz And even down to 30hz its doing a 152 Its all on how the box/wall is built really

Im tunned to 38hz, can still destroyyy 27hz and pull off a 152@30hz Its alll about how the box is built...

http://s25.photobucket.com/albums/c55/fox_racin4/?action=view&current=20360f9f.mp4

new deck, same problem i think they all do it, kinda of hard to watch all 12 of them at the same time since i dont want to leave it playing when said problem happens.. uploading a new/better vid

yes, same problem swiched RCAs from master amp to other master amp, same thing only happens in the mid 40hz area, will try a new deck and then rewire for the 4th time lol

^this. Cross directional loading was my first guess. still does it with 6 not hooked up, which eliminates it as a loading issue

tried swapping RCAs same issue, my next step is a new deck..